Hot Racing Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Light weight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio combinations
CNC 6061 aluminum motor plate, heat sink and arm mount
Larger open location for a bigger motor heat sink
Thirty day minimal guarantee beginning at date of purchase-valid
    in the United States only

INCLUDES:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Here is one more thing that compliments the thing being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

Want one more great thing to compliment the above mentioned thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Frequently acquired with the thing that you are presently reading about.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Automobiles

FUNCTIONS:
CNC aluminum building and construction diff case, black in color
Solidified steel gear
Sealed differentials enables tuning to track conditions by changing
    weight of diff oil
Four O-rings assist seal against fluid leak
Thirty day minimal guarantee beginning at date of purchase- legitimate
    in the United States only

INCLUDES:
Sealed Differential Case
Four O-Rings
Two Screws

SPECS:
Outside Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
General Density: 0834" (21.2mm)

Get this thing to enhance the one you are reading around.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the standard and XL variation of the Rustler
or Stampede.

Get this thing to enhance the one you are reading around.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Totally put together

INCLUDES:
Four totally put together shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the model

The below thing likewise sets actually well with the thing being discussed.

Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made of metal(probably with a low
quantity of steel).

INCLUDES:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear positioning shaft

WAJ
1/16/94