Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined strong brass billet

9g each fitted to the wheels to decrease the lorries center of gravity, increase its stability, improve climbing up, decrease the chance for turning backwards, and make for a total more capable spider

Friction fit to inside of KMC Machete wheels. Some CA glue can be used to secure setup

Can be used either in front of rear, but if you're only getting one pair we recommend utilizing them in the front

Requirements:

Center: 12mm hex

For : AXI31615

Size of external : 21.4mm

Size of inside : 12mm

Weight: 9.5g/ea

Width: 8mm

Frequently acquired with the thing that you are currently reviewing.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and central place to decrease the lorry's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined strong brass billet

Adds 9g of low and main weight to lower and centralize the lorry's center of gravity, increase its stability, and make it an

Overall more capable crawler

mm increased density over stock cover for additional strength and weight

Fits either the front or rear

Requirements:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want another excellent thing to compliment the above pointed out thing?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Guiding Knuckle, for Axial SCX24

Hot Racing strong brass SCX24 Worm equipment Axles guiding knuckles (guiding blocks) for the Axial SCX24 axles. Include weight to your spider where it needs it - down low.

Features:

CNC machined strong brass

Heavy to add weight to lorry for higher stability and lower CG

Cutouts on knuckle for access to external bearing race for simple bearing removal

Direct replacement for factory plastic guiding knuckles

Want another excellent thing to compliment the above pointed out thing?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Features:

CNC Machined Solid Brass construction.

You Will Receive:

Four Hex Wheel Centers

Four 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Here is a excellent thing that lots of others have purchased the same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light containers, winch fairlead for usage with Axial SCX 24.

Features:

Billet CNC machined aluminum

Anodized an elegant flat black

Integrated brush guards

Light containers for 3mm LED lights

Requirements:

Width: 58mm

Height: 8mm

Here is a excellent thing that lots of others have purchased the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with realistic light bar
• Practical chauffeur figure and numerous other scale information
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep whatever rigid and aligned
• Front and rear axles include a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated tank and resilient plastic suspension links provide tested Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and create greater ground clearance. Worm equipment drive also provides a low equipment ratio to decrease torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to deal with hard climbs up and rough routes. Like the bigger SCX10™ chassis, this smaller sized variation utilizes plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling performance even at this little scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the routes. Have a look at that Deadbolt body — with its narrow position, bulging hood, realistic chauffeur figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

Adding much more to its novice appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Whatever needed for action remains in the box: assembled and ended up lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep whatever intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the right amount of torque to assist rise high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists protect the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones offer strength and sturdiness to keep things running during hard climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated tanks and resilient plastic suspension links provides the crawling performance you've understood and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, molded plastic strong axle style. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link style for the rear which is optimized to decrease axle guide and torque twist. We've also consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are legendary in the off-road world. They are molded in black and function stunning scale information, regardless of the little scale.
The formally certified Nitto Path Grappler M/T Tires provide a wonderful blend of off-road performance while still maintaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board parts. You can rapidly reach the battery and chassis by getting rid of simply 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size doesn't suggest the features require to do the same. No bushings discovered here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the whole lorry.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding precision, while also offering security for the servo gears in case of a bind or impact.
 

Requirements

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No