Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined strong brass billet

9g each fitted to the wheels to lower the lorries center of mass, increase its stability, improve climbing, reduce the chance for turning backwards, and produce a general more capable spider|spider}

Friction fit to within KMC Machete wheels. Some CA glue can be used to secure setup

Can be used either in front of rear, but if you're only getting one set we advise using them in the front

Specs:

Center: 12mm hex

For : AXI31615

Diameter of external : 21.4mm

Diameter of within : 12mm

Weight: 9.5g/ea

Width: 8mm

Regularly gotten with the thing that you are currently checking out.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and centralized location to lower the automobile's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined strong brass billet

Adds 9g of low and central weight to lower and centralize the automobile's center of mass, increase its stability, and make it an

Overall more capable crawler

mm increased thickness over stock cover for additional durability and weight

Fits either the front or rear

Specs:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want another great thing to compliment the above pointed out thing?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Steering Knuckle, for Axial SCX24

Hot Racing strong brass SCX24 Worm equipment Axles guiding knuckles (guiding blocks) for the Axial SCX24 axles. Add weight to your crawler where it needs it - down low.

Features:

CNC machined strong brass

Heavy to include weight to automobile for higher stability and lower CG

Cutouts on knuckle for access to external bearing race for simple bearing elimination

Direct replacement for factory plastic guiding knuckles

Want another great thing to compliment the above pointed out thing?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Functions:

CNC Machined Solid Brass construction.

You Will Receive:

Four Hex Wheel Centers

Four 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Below is a great thing that lots of others have actually purchased the very same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for usage with Axial SCX 24.

Functions:

Billet CNC machined aluminum

Anodized a trendy flat black

Integrated brush guards

Light buckets for 3mm LED lights

Specs:

Width: 58mm

Height: 8mm

Below is a great thing that lots of others have actually purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Practical narrow-stance rock crawler body in olive green or red
• Molded roll cage with sensible light bar
• Practical motorist figure and many other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and resilience
• Rugged steel C-channel frame rails with bracing keep whatever rigid and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links deliver proven Axial crawling efficiency
• Front and rear differentials each house a worm equipment setup to power the axles and create greater ground clearance. Worm equipment drive also provides a low equipment ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to take along on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to tackle difficult climbs up and rough trails. Like the bigger SCX10™ chassis, this smaller variation uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts proficiency and charm on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, sensible motorist figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever needed for action is in package: put together and ended up automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh TWO 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep whatever undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help ascend high climbs up. It's mated to a steel motor install to keep flex to a minimum, which assists secure the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones offer strength and resilience to keep things running during difficult climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and resilient plastic suspension links provides the crawling efficiency you have actually known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic strong axle style. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are installed in the front bumper. An extra LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the rear which is optimized to reduce axle steer and torque twist. We have actually also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are formed in black and function stunning scale details, in spite of the small scale.
The officially accredited Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road efficiency while still keeping exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board components. You can rapidly reach the battery and chassis by getting rid of simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not imply the features require to follow suit. No bushings found here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding accuracy, while also offering protection for the servo equipments in the event of a bind or effect.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No