JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24 (Hot Racing SXTF2612H | HRASXTF2612H)
Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Top Seller

Model: Hot Racing SXTF2612H
Dist. #: HRASXTF2612H   SKU: HRASXTF2612H

Customer Reviews:  5 of 5 (2 Reviews)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

Price:  $8.88

This item will earn you 9 reward point(s).
9 points = $0.18 off your next order. Learn More

Updated on May 16, 2022 03:24:07 PM

9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24...
9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

  • CNC machined strong brass billet

  • 9g each fitted to the wheels to reduce the lorries center of gravity, increase its stability, improve climbing up, decrease the possibility for flipping backwards, and produce a total more capable crawler

  • Friction fit to inside of KMC Machete wheels. Some CA glue can be utilized to protect installation

  • Can be utilized either in front of rear, however if you're just getting one set we suggest utilizing them in the front


  • Requirements:

  • Hub: 12mm hex

  • For : AXI31615

  • Diameter of external : 21.4mm

  • Diameter of inside : 12mm

  • Weight: 9.5g/ea

  • Width: 8mm


  • Frequently purchased with the item that you are currently reading about.

    9G Brass Differential Cover, For Axial Scx24

    9g Brass Differential Cover, for Axial SCX24

    Hot Racing heavy brass cover for SCX24 Worm gear Axles Includes 9g of weight to the axle in a low and centralized place to reduce the car's center of gravity, increase its stability, and make it an in general more capable crawler.

    Features:

  • CNC machined strong brass billet

  • Includes 9g of low and main weight to lower and centralize the car's center of gravity, increase its stability, and make it an

  • Overall more capable crawler

  • mm increased thickness over stock cover for additional durability and weight

  • Fits either the front or rear


  • Requirements:

  • Width:14.33 mm

  • Height:24 mm

  • Weight: 9g


  • Want an additional excellent item to match the above pointed out item?

    Brass Front Steering Knuckle, For Axial Scx24

    Brass Front Steering Knuckle, for Axial SCX24

    Hot Racing sturdy brass SCX24 Worm gear Axles guiding knuckles (guiding blocks) for the Axial SCX24 axles. Include weight to your crawler where it requires it - down low.

    Features:

  • CNC machined strong brass

  • Heavy to include weight to car for greater stability and lower CG

  • Cutouts on knuckle for access to external bearing race for easy bearing removal

  • Direct replacement for factory plastic guiding knuckles


  • Want an additional excellent item to match the above pointed out item?

    Brass Stock Wheels Hub, 7Mm Hex, For Scx24

    Brass Stock Wheels Hub, 7mm Hex, for SCX24

    Functions:

    CNC Machined Strong Brass construction.

    You Will Receive:

    4 Hex Wheel Centers

    4 2 x 6mm Axle Pins

    Requirements:

    Assembly onto SCX24.

    Specs:

    Hex: 7mm

    Inner size: 4mm

    Right here is a excellent item that lots of others have bought at the very same time.

    Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

    Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

    Hot Racing CNC machined aluminum front bumper with 3mm LED light containers, winch fairlead for use with Axial SCX 24.

    Functions:

  • Billet CNC machined aluminum

  • Anodized a stylish flat black

  • Integrated brush guards

  • Light containers for 3mm LED lights


  • Requirements:

  • Width: 58mm

  • Height: 8mm


  • Right here is a excellent item that lots of others have bought at the very same time.

    SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

    Key Functions:
    • Includes radio system, ESC and transmitter batteries
    • Includes motor and on-board LiPo battery
    • Practical narrow-stance rock crawler body in olive green or red
    • Molded roll cage with realistic light bar
    • Practical motorist figure and many other scale details
    • Officially licensed KMC XD229 Machete Crawl wheels
    • Officially licensed Nitto Path Grappler M/T tires (S30 substance, large block tread)
    • Full-time 4WD
    • Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
    • Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
    • Rugged steel C-channel frame rails with bracing keep whatever rigid and aligned
    • Front and rear axles include a two-piece, molded plastic strong axle style
    • 3-Link front and 4-link rear suspension supply optimal handling
    • Coil-over shocks with simulated tank and long lasting plastic suspension links provide proven Axial crawling performance
    • Front and rear differentials each home a worm gear setup to power the axles and produce greater ground clearance. Worm gear drive also supplies a low gear ratio to decrease torque twist
    • Two LEDs in the front bumper for night driving
    The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to take along on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

    Even new modelers driving the SCX24 chassis will be well-equipped to take on difficult climbs up and rough routes. Like the bigger SCX10™ chassis, this smaller variation uses a lot of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

    For the most reputable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that minimizes torque twist.

    Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays skills and charm on the routes. Take a look at that Deadbolt body — with its narrow position, bulging hood, realistic motorist figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

    Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Whatever needed for action is in package: assembled and ended up car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh TWO 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

    What's in the Box?
    (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
        (1) Axial AE-6 ESC/receiver combination (set up)
        (1) Dynamite® 88T brushed electrical motor (set up)
        (1) Axial AS-1 guiding servo (set up)
    (1) Axial® AX-4 2.4GHz 2-channel radio
    (4) AA transmitter batteries
    (1) 350mAh TWO 7.4V LiPo battery
    (1) USB LiPo battery charger
    (1) Product Handbook



    STEEL C-CHANNEL CHASSIS FRAME RAILS
    STEEL C-CHANNEL CHASSIS FRAME RAILS
    Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep whatever intact and aligned.
     
    DYNAMITE® 88T BRUSHED MOTOR
    DYNAMITE® 88T BRUSHED MOTOR
    The Dynamite 88T brushed electrical motor supplies the correct amount of torque to assist rise high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists protect the gears.
     

    WORM GEARS
    WORM GEARS
    The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and produce greater ground clearance.
     
    DURABLE STEEL AXLES
    DURABLE STEEL AXLES
    Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running during difficult climbs up and rough routes.
     

    SPLINED DRIVE SHAFTS
    SPLINED DRIVE SHAFTS
    The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
     
    FEATURE_TITLE
    COILOVER SHOCK ABSORBERS
    Even at this small scale, the mix of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling performance you have actually known and expect from Axial.
     

    FRONT AND BACK SOLID AXLES
    FRONT AND REAR SOLID AXLES
    The front and rear axles include a two piece, molded plastic strong axle style. For optimal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
     

    LED LIGHTS INCLUDED
    LED LIGHTS INCLUDED
    Two intense LED lights are included and are installed in the front bumper. An extra LED light port on the ESC enables you to include optional LED lights.
     
    4-LINK BACK SUSPENSION
    4-LINK REAR SUSPENSION
    The suspension geometry utilizes a 4-Link style for the rear which is optimized to decrease axle guide and torque twist. We have actually also included additional suspension links for adjusting your wheelbase length.
     

    KMC XD229 MACHETE CRAWL WHEELS & NITTO PATH GRAPPLER M/T TIRES
    KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
    Officially licensed KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature sensational scale details, regardless of the small scale.
    The officially licensed Nitto Path Grappler M/T Tires offer a wonderful mix of off-road performance while still retaining excellent composure for on-road use.
     
    HINGED BODY SYSTEM
    HINGED BODY SYSTEM
    The hinged body system offers easy access to on-board components. You can rapidly reach the battery and chassis by getting rid of just two body clips and swinging the body up.
     

    FULL BALL BEARINGS
    FULL BALL BEARINGS
    Just because the SCX24™ is smaller in size does not imply the features need to follow suit. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the whole car.
     
    AXIAL AS-1 SERVO
    AXIAL AS-1 SERVO
    Installed just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also providing security for the servo gears in the event of a bind or effect.
     

    Requirements

    Type: Spider
    Scale: 1/24
    Length: 7.8" (199.5mm)
    Width: 3.9" (99.5mm)
    Height: 4.73" (120.2mm)
    Ground Clearance: 1.06" (27mm)
    Wheepoundase: 5.25" (133.5mm)
    Weight: 0.5lb (0.22kg)
    Chassis: Stamped steel rails
    Suspension: Strong axle, front and rear
    Drivetrain: 4WD
    Tire Type: Nitto Path Grappler M/T, large block tread
    Speed Control: AE-6 ESC receiver/combo
    Radio: AX-4 2.4GHz 2-channel
    Servos: AS-1 steering servo
    Batteries: 7.4V 350mAh 30C LiPo (included)
    Charger: USB LiPo battery charger (included)
    Equipment Pitch: 32-Pitch
    Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
    Kit/RTR: RTR
    Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
    Body: Painted and cut Axial Deadbolt
    Ball Bearings: Complete body
    Is Assembly Required: No

    Frequently Bought Together

    Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24
    +
    Hot Racing 9G Brass Differential Cover, For Axial Scx24
    +
    Hot Racing Brass Front Steering Knuckle, For Axial Scx24
    This Item: Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24
    $8.88
    Hot Racing 9G Brass Differential Cover, For Axial Scx24
    $16.88
    Hot Racing Brass Front Steering Knuckle, For Axial Scx24
    $26.88

    Total Price: $52.64

    Add All Three To Cart
    5 out of 5 stars
    5 star  
      (2)
    4 star  
      (0)
    3 star  
      (0)
    2 star  
      (0)
    1 star  
      (0)

    Share your thoughts with others

    Write a Customer Review
      
      

     Tiny crawler
    By Jason C on February 27, 2020   Verified Purchase

    Definitely worth the money. A great upgrade for these tiny rigs.

    Was this review helpful to you?
      
    Thank you for your feedback.

     Fits great
    By Brett J on March 24, 2021   Verified Purchase

    Great weights that fit in my SCX24 C10

    Was this review helpful to you?
      
    Thank you for your feedback.

    Customers who bought this product also purchased

    Visual Parts Finder
    ";