JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24 (Hot Racing SXTF2612H | HRASXTF2612H)

Top Seller

Model: Hot Racing SXTF2612H
Dist. #: HRASXTF2612H   SKU: HRASXTF2612H

Customer Reviews: Rated 5.0 stars 5 of 5 (2 Reviews)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

Price:  $9.29

This item will earn you 9 reward point(s).
9 points = $0.18 off your next order. Learn More

Updated on May 19, 2024 11:27:03 AM

9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24...
9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

  • CNC machined strong brass billet

  • 9g each fitted to the wheels to decrease the cars center of mass, increase its stability, enhance climbing up, reduce the chance for turning in reverse, and make for a total more capable spider|spider}

  • Friction fit to within KMC Machete wheels. Some CA glue can be used to secure setup

  • Can be used either in front of back, however if you're just getting one set we suggest utilizing them in the front


  • Specs:

  • Hub: 12mm hex

  • For : AXI31615

  • Diameter of outer : 21.4mm

  • Diameter of inside : 12mm

  • Weight: 9.5g/ea

  • Width: 8mm


  • Regularly bought with the product that you are presently reading about.

    9G Brass Differential Cover, For Axial Scx24

    9g Brass Differential Cover, for Axial SCX24

    Hot Racing heavy brass cover for SCX24 Worm gear Axles Includes 9g of weight to the axle in a low and central place to decrease the vehicle's center of gravity, increase its stability, and make it an in general more capable crawler.

    Features:

  • CNC machined strong brass billet

  • Includes 9g of low and main weight to lower and centralize the vehicle's center of mass, increase its stability, and make it an

  • Overall more capable crawler

  • mm increased thickness over stock cover for additional durability and weight

  • Fits either the front or back


  • Specs:

  • Width:14.33 mm

  • Height:24 mm

  • Weight: 9g


  • Want another terrific product to compliment the above discussed product?

    Brass Front Steering Knuckle, For Axial Scx24

    Brass Front Steering Knuckle, for Axial SCX24

    Hot Racing sturdy brass SCX24 Worm gear Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Add weight to your crawler where it needs it - down low.

    Features:

  • CNC machined strong brass

  • Heavy to include weight to vehicle for greater stability and lower CG

  • Cutouts on knuckle for access to outer bearing race for simple bearing removal

  • Direct replacement for factory plastic steering knuckles


  • Want another terrific product to compliment the above discussed product?

    Brass Stock Wheels Hub, 7Mm Hex, For Scx24

    Brass Stock Wheels Hub, 7mm Hex, for SCX24

    Features:

    CNC Machined Solid Brass construction.

    You Will Get:

    Four Hex Wheel Hubs

    Four 2 x 6mm Axle Pins

    Requirements:

    Assembly onto SCX24.

    Specs:

    Hex: 7mm

    Inner size: 4mm

    Below is a terrific product that many others have actually purchased the very same time.

    Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

    Aluminum Front Bumper w/Fairlead and Light Containers, for Axial SCX24

    Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for use with Axial SCX 24.

    Features:

  • Billet CNC machined aluminum

  • Anodized a stylish flat black

  • Integrated brush guards

  • Light buckets for 3mm LED lights


  • Specs:

  • Width: 58mm

  • Height: 8mm


  • Below is a terrific product that many others have actually purchased the very same time.

    SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

    Key Features:
    • Includes radio system, ESC and transmitter batteries
    • Includes motor and on-board LiPo battery
    • Practical narrow-stance rock crawler body in olive green or red
    • Molded roll cage with reasonable light bar
    • Practical driver figure and lots of other scale information
    • Officially licensed KMC XD229 Machete Crawl wheels
    • Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
    • Full-time 4WD
    • Splined and sleeved front and rear drive shafts permit maximum suspension travel while keeping the power to the wheels
    • Steel front and rear axles, front stub axles and dogbones supply strength and sturdiness
    • Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
    • Front and rear axles consist of a two-piece, molded plastic strong axle design
    • 3-Link front and 4-link rear suspension supply optimum handling
    • Coil-over shocks with simulated tank and long lasting plastic suspension links deliver tested Axial crawling performance
    • Front and rear differentials each home a worm gear setup to power the axles and produce higher ground clearance. Worm gear drive likewise supplies a low gear ratio to reduce torque twist
    • Two LEDs in the front bumper for night driving
    The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

    Even brand-new modelers driving the SCX24 chassis will be fully equipped to deal with difficult climbs and rough trails. Like the larger SCX10™ chassis, this smaller sized version utilizes a lot of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

    For the most dependable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that decreases torque twist.

    Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charisma on the trails. Have a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

    Adding even more to its novice appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Everything required for action remains in the box: put together and ended up vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

    What's in the Box?
    (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
        (1) Axial AE-6 ESC/receiver combo (set up)
        (1) Dynamite® 88T brushed electrical motor (set up)
        (1) Axial AS-1 steering servo (set up)
    (1) Axial® AX-4 2.4GHz 2-channel radio
    (4) AA transmitter batteries
    (1) 350mAh 2S 7.4V LiPo battery
    (1) USB LiPo battery charger
    (1) Item Manual



    STEEL C-CHANNEL CHASSIS FRAME RAILS
    STEEL C-CHANNEL CHASSIS FRAME RAILS
    Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and durable steel c-channel frame rails with bracing to keep everything undamaged and aligned.
     
    DYNAMITE® 88T BRUSHED MOTOR
    DYNAMITE® 88T BRUSHED MOTOR
    The Dynamite 88T brushed electrical motor supplies the correct amount of torque to assist rise steep climbs. It's mated to a steel motor install to keep flex to a minimum, which assists secure the gears.
     

    WORM GEARS
    WORM GEARS
    The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and produce higher ground clearance.
     
    DURABLE STEEL AXLES
    DURABLE STEEL AXLES
    Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and sturdiness to keep things running throughout difficult climbs and rough trails.
     

    SPLINED DRIVE SHAFTS
    SPLINED DRIVE SHAFTS
    The front and rear drive shafts are splined and sleeved to permit maximum suspension travel while keeping the power to the wheels.
     
    FEATURE_TITLE
    COILOVER SHOCK ABSORBERS
    Even at this small scale, the mix of coilover shocks with simulated tanks and long lasting plastic suspension links provides the crawling performance you've known and anticipate from Axial.
     

    FRONT AND BACK SOLID AXLES
    FRONT AND REAR SOLID AXLES
    The front and rear axles consist of a 2 piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
     

    LED LIGHTS INCLUDED
    LED LIGHTS INCLUDED
    Two intense LED lights are consisted of and are installed in the front bumper. An extra LED light port on the ESC permits you to include optional LED lights.
     
    4-LINK BACK SUSPENSION
    4-LINK REAR SUSPENSION
    The suspension geometry uses a 4-Link design for the back which is optimized to reduce axle steer and torque twist. We've likewise consisted of additional suspension links for changing your wheelbase length.
     

    KMC XD229 MACHETE CRAWL WHEELS & NITTO PATH GRAPPLER M/T TIRES
    KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
    Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are formed in black and feature sensational scale information, in spite of the small scale.
    The officially accredited Nitto Trail Grappler M/T Tires provide a fantastic mix of off-road performance while still maintaining outstanding composure for on-road use.
     
    HINGED BODY SYSTEM
    HINGED BODY SYSTEM
    The hinged body system provides simple access to on-board parts. You can rapidly reach the battery and chassis by eliminating just 2 body clips and swinging the body up.
     

    FULL BALL BEARINGS
    FULL BALL BEARINGS
    Even if the SCX24™ is smaller sized in size does not indicate the functions need to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole vehicle.
     
    AXIAL AS-1 SERVO
    AXIAL AS-1 SERVO
    Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering accuracy, while likewise offering protection for the servo gears in case of a bind or impact.
     

    Specs

    Type: Spider
    Scale: 1/24
    Length: 7.8" (199.5mm)
    Width: 3.9" (99.5mm)
    Height: 4.73" (120.2mm)
    Ground Clearance: 1.06" (27mm)
    Wheelbase: 5.25" (133.5mm)
    Weight: 0.5lb (0.22kg)
    Chassis: Stamped steel rails
    Suspension: Solid axle, front and rear
    Drivetrain: 4WD
    Tire Type: Nitto Trail Grappler M/T, large block tread
    Speed Control: AE-6 ESC receiver/combo
    Radio: AX-4 2.4GHz 2-channel
    Servos: AS-1 steering servo
    Batteries: 7.4V 350mAh 30C LiPo (consisted of)
    Battery charger: USB LiPo battery charger (consisted of)
    Gear Pitch: 32-Pitch
    Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
    Kit/RTR: RTR
    Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
    Body: Painted and cut Axial Deadbolt
    Ball Bearings: Complete body
    Is Assembly Required: No

    Frequently Bought Together

    Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24
    +
    Hot Racing 9G Brass Differential Cover, For Axial Scx24
    +
    Hot Racing Brass Front Steering Knuckle, For Axial Scx24
    This Item: Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24
    $9.29
    Hot Racing 9G Brass Differential Cover, For Axial Scx24
    $16.88
    Hot Racing Brass Front Steering Knuckle, For Axial Scx24
    $26.88

    Total Price: $53.05

    Add All Three To Cart
    Rated 5.0 stars
    5 out of 5 stars
    5 star  
      (2)
    4 star  
      (0)
    3 star  
      (0)
    2 star  
      (0)
    1 star  
      (0)

    Share your thoughts with others

    Write a Customer Review
      
      

    Rated 5 stars Tiny crawler
    By Jason C on February 27, 2020   Verified Purchase

    Definitely worth the money. A great upgrade for these tiny rigs.

    Was this review helpful to you?
      
    Thank you for your feedback.

    Rated 5 stars Fits great
    By Brett J on March 24, 2021   Verified Purchase

    Great weights that fit in my SCX24 C10

    Was this review helpful to you?
      
    Thank you for your feedback.

    Customers who bought this product also purchased

    Visual Parts Finder