Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined strong brass billet

9g each fitted to the wheels to reduce the automobiles center of gravity, increase its stability, improve climbing up, minimize the chance for turning in reverse, and produce a general more capable crawler

Friction fit to within KMC Machete wheels. Some CA glue can be used to protect setup

Can be used either in front of back, however if you're just getting one pair we recommend using them in the front

Specs:

Center: 12mm hex

For : AXI31615

Size of outer : 21.4mm

Size of within : 12mm

Weight: 9.5g/ea

Width: 8mm

Often purchased with the item that you are presently checking out.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and centralized place to reduce the vehicle's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined strong brass billet

Adds 9g of low and main weight to lower and centralize the vehicle's center of gravity, increase its stability, and make it an

Overall more capable crawler

mm increased thickness over stock cover for additional durability and weight

Fits either the front or back

Specs:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want another great item to match the above discussed item?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Guiding Knuckle, for Axial SCX24

Hot Racing heavy duty brass SCX24 Worm equipment Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Include weight to your crawler where it requires it - down low.

Features:

CNC machined strong brass

Heavy to include weight to vehicle for higher stability and lower CG

Cutouts on knuckle for access to outer bearing race for easy bearing elimination

Direct replacement for factory plastic steering knuckles

Want another great item to match the above discussed item?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Features:

CNC Machined Solid Brass construction.

You Will Get:

Four Hex Wheel Centers

Four 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Below is a great item that numerous others have bought at the exact same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Pails, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for usage with Axial SCX 24.

Features:

Billet CNC machined aluminum

Anodized a trendy flat black

Integrated brush guards

Light buckets for 3mm LED lights

Specs:

Width: 58mm

Height: 8mm

Below is a great item that numerous others have bought at the exact same time.



Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Sensible narrow-stance rock crawler body in olive green or red
• Molded roll cage with reasonable light bar
• Sensible chauffeur figure and lots of other scale information
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and resilience
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links provide tested Axial crawling efficiency
• Front and rear differentials each house a worm equipment setup to power the axles and create greater ground clearance. Worm equipment drive also provides a low equipment ratio to minimize torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to take on tough climbs up and rough trails. Like the larger SCX10™ chassis, this smaller variation utilizes a lot of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most trustworthy handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling efficiency even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charisma on the trails. Have a look at that Deadbolt body — with its narrow position, bulging hood, reasonable chauffeur figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding much more to its novice appeal, the SCX24 Deadbolt comes 100% complete and prepared to run. Whatever required for action remains in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help ascend high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which helps safeguard the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and resilience to keep things running throughout tough climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling efficiency you've understood and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, formed plastic strong axle style. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC permits you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link style for the back which is optimized to minimize axle guide and torque twist. We've also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature stunning scale information, regardless of the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a great mix of off-road efficiency while still maintaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system uses easy access to on-board components. You can quickly reach the battery and chassis by eliminating just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't indicate the features need to follow suit. No bushings found here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo equipments in the event of a bind or effect.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No