Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined solid brass billet

9g each fitted to the wheels to decrease the cars center of mass, increase its stability, improve climbing, decrease the possibility for turning backwards, and make for a general more capable crawler

Friction fit to inside of KMC Machete wheels. Some CA glue can be utilized to secure installation

Can be utilized either in front of back, but if you're just getting one set we advise using them in the front

Specifications:

Center: 12mm hex

For : AXI31615

Diameter of outer : 21.4mm

Diameter of inside : 12mm

Weight: 9.5g/ea

Width: 8mm

Regularly bought with the thing that you are currently reviewing.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm gear Axles Includes 9g of weight to the axle in a low and central area to decrease the automobile's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined solid brass billet

Includes 9g of low and central weight to lower and centralize the automobile's center of mass, increase its stability, and make it an

Overall more capable crawler

mm increased density over stock cover for extra durability and weight

Fits either the front or back

Specifications:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want an additional fantastic thing to match the above mentioned thing?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Guiding Knuckle, for Axial SCX24

Hot Racing heavy duty brass SCX24 Worm gear Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Include weight to your crawler where it requires it - down low.

Features:

CNC machined solid brass

Heavy to include weight to automobile for higher stability and lower CG

Cutouts on knuckle for access to outer bearing race for simple bearing removal

Direct replacement for factory plastic steering knuckles

Want an additional fantastic thing to match the above mentioned thing?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Features:

CNC Machined Solid Brass construction.

You Will Receive:

4 Hex Wheel Centers

4 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Right here is a fantastic thing that many others have bought at the same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light containers, winch fairlead for use with Axial SCX 24.

Features:

Billet CNC machined aluminum

Anodized a trendy flat black

Integrated brush guards

Light containers for 3mm LED lights

Specifications:

Width: 58mm

Height: 8mm

Right here is a fantastic thing that many others have bought at the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with realistic light bar
• Reasonable motorist figure and many other scale information
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and resilience
• Rugged steel C-channel frame rails with bracing keep whatever stiff and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated tank and resilient plastic suspension links provide tested Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and create greater ground clearance. Worm gear drive likewise provides a low gear ratio to decrease torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to take on tough climbs and rough trails. Like the bigger SCX10™ chassis, this smaller sized version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most reliable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links delivers Axial-worthy crawling efficiency even at this little scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that minimizes torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays proficiency and charisma on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, realistic motorist figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding much more to its novice appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Everything required for action is in the box: put together and finished automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep whatever intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help ascend high climbs. It's mated to a steel motor mount to keep flex to a minimum, which assists protect the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and resilience to keep things running during tough climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated tanks and resilient plastic suspension links delivers the crawling efficiency you have actually known and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 bright LED lights are included and are installed in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is optimized to decrease axle guide and torque twist. We have actually likewise included extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature spectacular scale information, regardless of the little scale.
The formally accredited Nitto Path Grappler M/T Tires offer a wonderful mix of off-road efficiency while still retaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board components. You can rapidly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size does not mean the features require to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering accuracy, while likewise supplying security for the servo equipments in case of a bind or impact.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Battery charger: USB LiPo battery charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No