HOBBYWING Skywalker 20A Esc

SKYWALKER 20A

Features:

Security arming feature: Regardless the throttle stick position, the motor will not spin after battery linked

Throttle calibration funtion: Throttle variety can be calibrated to be compatible with various transmitters.

User programmable.

Several program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field.

Compatible with Lipo and NiMH battery.

Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.

Specifications:

Output: Constant 20A, Burst 25A up to 10 seconds.

Input Voltage: 2-3S Lipo, 5-9 cells NiMH.

BEC: 2A / 5V Linear mode BEC.

Refresh rate of the throttle signal: 50Hz to 432Hz

Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.

1.6 Size: 42mm*25mm*8mm.

Right here is another product that compliments the product being talked about.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

You will certainly enjoy this thing if you have the thing earlier pointed out.

300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE (JR)

Frequently purchased with the product that you are presently reviewing.

EC3 Device & Battery Connector


Features

Efficient in 60 constant ampsErgonomically pleasing and easy to gripProtected to prevent shorting and reverse polaritySuperior technology suited to today's innovative applicationsConnectors are factory-installed with ParkZone® F-27C Stryker, E-flite PNP aircraft,Developed with convenience and reliability in mind


Overview

E-flite's high-quality EC3 adapters and leads ought to be a staple for each workbench. EC3 (E-flite Adapter 3.5mm) adapters, leads with adapters, and devices are best for electrical power applications and work with any battery, battery charger, ESC, Power Meter, etc.

The below product also pairs actually well with the product being talked about.

930Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1800Kv
Max. efficiency existing: 6-10 Amp
NoLoad current / 10 V: 0.8 Amp
Current capability: 16 A/60 s
Max. Effectiveness: 74%
Shaft diameter: 3mm

A2208-12 comparable to: AXI 2208/20, E-Flite Park 370

Want another great product to enhance the above pointed out product?

9x3.8 Slow Flyer Propeller

This is a 9x3.8 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized style offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist preserve true, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon prop
One set of little shaft locating rings
One locating ring direction sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ50007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 3.8
Density of center: 3/8"
Hole Size: ¼"

COMMENTS:
Slo-Flyer props are Not developed for Radiance engines