JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor (Hobbico HCAP0332 | HCAP0332)

Model: Hobbico HCAP0332
Dist. #: HCAP0332   SKU: HCAP0332

Be the first to review this product. (Write Review)

Out of stock

Price:  $17.99

This item will earn you 18 reward point(s).
18 points = $0.36 off your next order. Learn More

Updated on Feb 25, 2020 02:24:11 PM

VoltWatch2 4.8V/6V Rx Battery Monitor...
This is the VoltWatch2 on-board Receiver Battery Screen for
4.8V and 6V NiCd and NiMH receiver packs.
This installs on the outside of the aircraft, so you can see at a glance
the status of the receiver battery mounted inside.

7-LEDs provide immediate, precise battery voltage status of Low, Safe,
    or Max. Only one LED radiances at a time
Little switch to choose 4.8V or 6V battery
Very lightweight, only .15oz (4.3g) device can install on the side
of the fuselage, or under the airplane's canopy
Draws amazingly low current - from 4-34mA depending upon the battery
Plugs into any open receiver channel utilizing a Futaba J connector
One year guarantee

One VoltWatch2 On-Board Receiver Battery Screen w/Futaba J plug
One 1.5"x1" piece of double sided mounting tape

Plugging into any unused receiver port
Installing onto the aircraft with double-sided tape

Length: 1.65" (42mm)
Width: .63" (16mm)
Height: .16" (4mm)
Weight: .15oz (4.3 grams)
Present Draw: approx 4-34mA
Lead Length: 198mm (7.79")

This has a Futaba J connector pre-installed. For radios aside from
    Futaba, you will have to change or customize the plug.
Because of reverse polarity, if you want to use this with the
older Airtronics batteries, you need to also buy AIRM4400
Visual Parts Finder