Hitec Universal Servo Grease

This is for usage with all manufacturers' servo gear sets.
To usage, merely disassemble servo, throughly clean all old grease off gears, and
use brand-new grease moderately during reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

You will certainly like this item if you have the item just above discussed.

Servo Gear Set #2070/2075

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES:
Total gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

CONSISTS OF:
4 servo gears and bearings and direction sheet

NEEDS:
Installation on the 2070 or 2075 Traxxas servo

This is a wonderful enhancement to the product currently being talked about.

DS415M Servo Gear

Use for DS415M/416M servo.
also used for HSD41601

Requirements:
DS415M gear G1x1
DS415M the gear G2x1
DS415M gear G3x1
DS415M gear G4x1
DS415M gear G5x1

The listed below product likewise sets truly well with the product being talked about.

Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the ultimate in fuel filtration.
Can be used with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

This is a wonderful enhancement to the product currently being talked about.

Slant Thread Main Drive Gear/121T

Use for T-REX 450 Series.
Must with::H45157 Motor Pinion Helical Gear 12T.

Requirements:
CNC M0.6 Slant Thread Main drive gear(121T) x 3
Weight:35.3g
Brand-new style high strength 121 tooth Mod 0.6 helical primary hear for 450 size helis. The boost gear pitch can stand up to greater power, at the very same time lessen functional noise. An excellent upgrade to stand up to the modern high power system.
Uses high strength polymer plastic with outstanding rigidity and flexibility characteristics.
Patented distinct integrated in fan design to create induced air circulation, effectively cooling electronics and motor.
Gear ratio 1:10.08.

Right here is a excellent product that numerous others have purchased the same time.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Variety Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

This product is often purchased with the above stated product.

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This component is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not available individually.