Hitec Universal Servo Grease

This is for use with all makers' servo gear sets.
To use, simply take apart servo, throughly clean all old grease off gears, and
use new grease moderately during reassembly.
The grease (.1 oz) comes in a small toothpaste-like metal tube.

DEE
8.Oct.97

You will certainly like this product if you have the product earlier stated.

Servo Gear Set #2070/2075

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES:
Total gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

CONSISTS OF:
Four servo gears and bearings and instruction sheet

NEEDS:
Setup on the 2070 or 2075 Traxxas servo

This is a superb addition to the item currently being discussed.

DS415M Servo Gear

Use for DS415M/416M servo.
also used for HSD41601

Requirements:
DS415M gear G1x1
DS415M the gear G2x1
DS415M gear G3x1
DS415M gear G4x1
DS415M gear G5x1

The below item likewise sets actually well with the item being discussed.

Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to provide the ultimate in fuel filtration.
Can be used with gas or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

This is a superb addition to the item currently being discussed.

Slant Thread Main Drive Gear/121T

Use for T-REX 450 Series.
Need to with::H45157 Motor Pinion Helical Gear 12T.

Requirements:
CNC M0.6 Slant Thread Main drive gear(121T) x 3
Weight:35.3g
Brand-new design high strength 121 tooth Mod 0.6 helical primary hear for 450 size helis. The boost gear pitch can stand up to greater power, at the exact same time decrease operational sound. A fantastic upgrade to stand up to the modern-day high power system.
Utilizes high strength polymer plastic with exceptional rigidity and versatility qualities.
Patented distinct integrated in fan design to develop induced air circulation, effectively cooling electronic devices and motor.
Gear ratio 1:10.08.

Below is a wonderful item that lots of others have actually bought at the same time.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Suitable for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Fit for the diverse throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

This item is frequently acquired with the above mentioned item.

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not available independently.