Hitec Y-Harness 6

This is a 6" Long, Heavy Duty Y-Harness with
Hitec S, JR, Airtronics Z Connectors.

FEATURES:
Gold-plated teminals improve conductivity and avoid oxidation for
    longer lifespan.
Heavier, 20-gauge wire deals with greater existing loads.

INCLUDES:
One 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z
    Connectors

SPECIFICATIONS:
Fork in "Y" occurs 2" from the receiver port
General Length: 6"
Connectors: one male and two female

Right here is one more thing that compliments the thing being talked about.



This is a 12.5x6 plane prop. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized style gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction minimizes rotating mass
    for greater output and longer life.
Reinforcing carbon fibers assist keep real, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON prop

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole diameter: 1/4"

Right here is one more thing that compliments the thing being talked about.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: unfavorable
Red: positive
Yellow: signal

This thing is regularly acquired with the above mentioned thing.

Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be used with gas or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"