Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery packs

INCLUDES:
Balance board
Balance lead

REQUIRES:
Connecting in between battery charger and batteries

Lots of others have actually gotten this product together with the product that you are currently reviewing.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a battery charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Port

Get this product to improve the one you read around.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Star Plug
Star plug works with the R/C market's most typically used
    polarized power plug, tapered shape and grip strips for quick and
    easy connection and separation

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Rated Capability: 5000mAh
Release Rating: 25C continuous
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Port: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any method or leak cells
NEVER location on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a fantastic addition to the product currently being talked about.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Links a battery with an EC3 male plug to a battery charger with 4mm
    input jacks
14 AWG wire

INCLUDES:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This product compliments the main item below.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Automatically controls current rate during charging and discharging
    process
Four independent 50-watt power outputs charges up to 4 batteries
    at the same time
Four independent balancing ports for lithium batteries
Five user adjustable presets per output
Twin fan cooling system with internal sensor for managing fan
    speed
Batteries can be set to immediately Charge/Release or Discharge/
    Charge up to an optimum of 5 cycles
Automatic charge termination* if battery temperature level gets too high
    *Temperature probe (HRCP4159) is required and need to be acquired
    separately
PC-based program can examine the attributes of each battery by means of
    a USB port*, graph of voltage, current and capacity curves with
    individual voltage of each cell in a lithium pack can be displayed
    on a PC- *PC-LINK USB adaptor is required and need to be acquired
    separately, HRCP4168

INCLUDES:
Hitec X4 Plus AC/DC Powered Multi Charger with Air Conditioning and DC Input Cables
    Battery Clamps, Tamiya Charge Port, RX Battery Charge
    Port, TP/FP, HP/PQ, and XH type LiPo Balancer Boards 2 Bare
    Wire Ports, Alligator Clip Charging Connector and Manual

SPECIFICATIONS:
Input Voltage: Air Conditioning, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Present: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Measurements: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5lbs (1.57kg)