Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

INCLUDES:
Balance board
Balance lead

REQUIRES:
Connecting between charger and batteries

Many others have bought this item together with the item that you are presently checking out.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Connector

Get this item to improve the one you read about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Perfect for 1/10 scale vehicle applications
Prewired with Star Plug
Star plug is compatible with the R/C market's most frequently used
    polarized power plug, tapered shape and grip strips for quick and
    simple connection and separation

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capacity: 5000mAh
Discharge Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Balancing Connector: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a wonderful addition to the item presently being gone over.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Links a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

INCLUDES:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This item praises the main item here.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Automatically manages current rate throughout charging and discharging
    procedure
4 independent 50-watt power outputs charges up to four batteries
    at once
4 independent balancing ports for lithium batteries
Five user adjustable presets per output
Twin fan cooling system with internal sensor for managing fan
    speed
Batteries can be set to immediately Charge/Discharge or Discharge/
    Charge up to a maximum of 5 cycles
Automatic charge termination* if battery temperature level gets too high
    *Temperature probe (HRCP4159) is needed and should be acquired
    independently
PC-based program can evaluate the qualities of each battery by means of
    a USB port*, graph of voltage, current and capacity curves with
    specific voltage of each cell in a lithium pack can be shown
    on a PC- *PC-LINK USB adaptor is needed and should be acquired
    independently, HRCP4168

INCLUDES:
Hitec X4 Plus AC/DC Powered Multi Charger with AC and DC Input Cables
    Battery Clamps, Tamiya Charge Connector, RX Battery Charge
    Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Connectors, Alligator Clip Charging Connector and Manual

SPECS:
Input Voltage: AC, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, total 200W)
Discharging Current: 0.1-1.0A (max 5W x4, total 20W)
Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5lbs (1.57kg)