Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

INCLUDES:
Balance board
Balance lead

NEEDS:
Connecting between battery charger and batteries

Many others have bought this product together with the product that you are presently reading about.



This is the Venom Traxxas Male to Battery charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Adapter

Get this product to boost the one you are reading around.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Perfect for 1/10 scale automobile applications
Prewired with Star Plug
Star plug is compatible with the R/C industry's most typically utilized
    polarized power plug, tapered shape and grip strips for quick and
    easy connection and separation

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capacity: 5000mAh
Discharge Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER disassemble or customize pack wiring in any method or leak cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a fantastic enhancement to the product presently being discussed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Battery charger Adapter.

FEATURES:
Links a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

INCLUDES:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This product compliments the main item right here.



This is the Hitec X4 Plus AC/DC Powered Multi Battery charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Immediately manages existing rate throughout charging and releasing
    procedure
4 independent 50-watt power outputs charges up to 4 batteries
    at the same time
4 independent balancing ports for lithium batteries
5 user adjustable presets per output
Twin fan cooling system with internal sensing unit for controlling fan
    speed
Batteries can be set to automatically Charge/Discharge or Discharge/
    Charge up to an optimum of 5 cycles
Automatic charge termination* if battery temperature gets too high
    *Temperature probe (HRCP4159) is needed and must be bought
    independently
PC-based program can examine the attributes of each battery via
    a USB port*, chart of voltage, existing and capability curves with
    individual voltage of each cell in a lithium pack can be displayed
    on a PC- *PC-LINK USB adaptor is needed and must be bought
    independently, HRCP4168

INCLUDES:
Hitec X4 Plus AC/DC Powered Multi Battery charger with A/C and DC Input Cables
    Battery Clamps, Tamiya Charge Adapter, RX Battery Charge
    Adapter, TP/FP, HP/PQ, and XH type LiPo Balancer Boards 2 Bare
    Wire Adapters, Alligator Clip Charging Connector and Handbook

SPECS:
Input Voltage: A/C, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, total 200W)
Discharging Current: 0.1-1.0A (max 5W x4, total 20W)
Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5lbs (1.57kg)