JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V (Hitec 32082S | HRC32082S)

Top Seller

Model: Hitec 32082S
Dist. #: HRCM3282   SKU: HRC32082S

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

List Price:  $34.95
Price:  $23.99
You Save:  $10.96 (31%)

This item will earn you 24 reward point(s).
24 points = $0.48 off your next order. Learn More

Updated on Mar 28, 2024 05:58:26 AM

HS-82MG Micro Metal Gear Servo...
    This is the HS-82MG Metal Gear Micro Servo from Hitec.

FEATURES:
For small planes, gliders, electric helicopters and 1/18 scale cars

CONSISTS OF:
HS-82MG Metal Gear Micro Servo with universal port, 0.67" (17mm)
    size horn, 1.1" (29mm) double arm, 0.90" (23mm) 4-point horn
    and mounting hardware

NEEDS:
Installing in model and connecting to receiver

SPECIFICATIONS:
Speed: 0.12 sec/60° at 4.8V
0.10 sec/60° at 6.0V
Torque: 38.88oz-in (2.8kg-cm) at 4.8V
47.22oz-in (3.4kg-cm) at 6.0V
Weight: 0.66oz (19.0g)
Size: 1.17 x 0.47 x 1.16" (29.8 x 12.0 x 29.6mm)

COMMENTS:
The following replacement parts are offered;
Gear Set, HRCM6386
Horn Set, HRCM6326

Want one more terrific item to match the above stated item?



This is the ElectriFly Silver Series 45 amp Brushless Electronic Speed Control.
Great for larger high performance aircrafts. Providing
45A of constant current with a built-in Battery Circuit
which can deal with 2A, this ESC is easy to utilize
and really affordable.

FEATURES:
Suitable with NiCd, NiMH and LiPo batteries
Auto-detects input volts and sets Low-Voltage cutoff
8.5kHz switching frequency, for good run time and cool operation
Pre-installed Universal radio port* (see Comments listed below)
Pre-installed WS Deans Ultra male port for battery (see
Comments listed below)
Pre-installed gold plated 4mm female bullet ports for motor
High powered switching BEC (Battery Remover Circuit) which
    manages 3 or 4 standard servos
Full proportional forward and smooth throttle response with ON/OFF
    brake
Safe Start System** (see information in Comments listed below)
Thermal Defense stops motor when maximum temperature 230°F
    is reached
180 Day Warranty (U.S.A & Canada Just)

CONSISTS OF:
One Brushless ElectriFly Silver Series 45A Speed Control with
    pre-installed receiver port, battery port, and motor
    ports.

REQUIRES:
Mating motor connectors, use: GPMM3114
Mating battery port, use: WSDM3000

SPECIFICATIONS:
Length: 2.76" (70mm)
Width: 1.30" (33mm)
Height: .39" (10mm)
Weight: 1.76oz (50g)
Input Voltage: 6-12 cells NiCd/NiMH
2-4 cells LiPo
(20V input w/o BEC)
Output Current: 45A constant maximum
50A surge maximum
Max Output Power: 500 watts
ON-resistance: .008 ohms
Operating frequency: 16kHz repaired
BEC: 5V/2A
Low Voltage Cutoff: Battery voltage x .67
Thermal Cutoff: 230°F (110°C)
Timing Angle: 20°
Brake: ON/OFF

COMMENTS:
To utilize with "Old Airtronics" Rx, needs adapter: AIRM4400

**Safe Start System: Move throttle stay with full throttle position,
then to "OFF" position, then slowly advance throttle and motor will
start to run.

The "Silver Series" line of brushless electronic speed controls
    consist of numerous integrated security functions. One such function COULD
    POSSIBLY TRIGGER THE BRUSHLESS MOTOR TO STOP ROTATING when the
    transmitter's stick is at an extremely low position and/or if
    rotation of the brushless motor is impeded or obstructed in some
    method. This is NORMAL, as the ESC is detecting that a problem
    possibly exists with the motor and/or speed control. Rotation of
    the motor is stopped to secure the speed control from possible
    damage.
WARNING!!
If the ESC and motor have already been equipped and the motor has been
rotating usually, yet after moving the throttle stay with near minimum the
motor all of a sudden ceases to rotate usually even if the throttle stick is advanced
above minimum throttle, DO NOT RESTAURANT YOUR HANDS NEAR THE PROPELLER!! FAILURE
TO
OBEY THIS CAUTION COULD LEAD TO PERSONAL INJURY!! From this point, moving
the throttle hold up - even to full throttle may not trigger the motor to
rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To regain
control of the motor, move the throttle stay with absolute minimum throttle
position then advance the throttle stick up-wards as soon as again.
Alternatively, you can detach the battery from the ESC, then re-connect the
source of power and re-arm the system.
NEVER
come up to the propeller if the speed control is connected to input power!
ALWAYS
make sure the throttle stick is at minimum position before trying to
detach the battery from the speed control! ElectriFly is not accountable
for incidental damage or personal injury as a result of abuse of this product.

Frequently Bought Together

Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V
+
Hitec Hs-81 Micro Servo, .09Sec/42Oz @6.0V
+
Hitec Hs-645Mg Ultra Torque Mg Ball Bearing Servo, .20Sec/133Oz @6.0V
This Item: Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V
$23.99
Hitec Hs-81 Micro Servo, .09Sec/42Oz @6.0V
$16.99
Hitec Hs-645Mg Ultra Torque Mg Ball Bearing Servo, .20Sec/133Oz @6.0V
$34.99

Total Price: $75.97

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
What's New?
";