JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V (Hitec 32082S | HRC32082S)

Top Seller

Model: Hitec 32082S
Dist. #: HRCM3282   SKU: HRC32082S

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

List Price:  $34.95
Price:  $23.99
You Save:  $10.96 (31%)

This item will earn you 24 reward point(s).
24 points = $0.48 off your next order. Learn More

Updated on Mar 28, 2024 08:37:18 PM

HS-82MG Micro Metal Gear Servo...
    This is the HS-82MG Metal Equipment Micro Servo from Hitec.

FEATURES:
For little airplanes, gliders, electrical helicopters and 1/18 scale automobiles

SUCHES AS:
HS-82MG Metal Equipment Micro Servo with universal port, 0.67" (17mm)
    diameter horn, 1.1" (29mm) double arm, 0.90" (23mm) 4-point horn
    and mounting hardware

REQUIRES:
Setting up in model and linking to receiver

SPECS:
Speed: 0.12 sec/60° at 4.8V
0.10 sec/60° at 6.0V
Torque: 38.88oz-in (2.8kg-cm) at 4.8V
47.22oz-in (3.4kg-cm) at 6.0V
Weight: 0.66oz (19.0g)
Size: 1.17 x 0.47 x 1.16" (29.8 x 12.0 x 29.6mm)

REMARKS:
The following replacement parts are offered;
Equipment Set, HRCM6386
Horn Set, HRCM6326

Want another fantastic product to compliment the above stated product?



This is the ElectriFly Silver Series 45 amp Brushless Electronic Speed Control.
Great for bigger high performance aircrafts. Providing
45A of continuous existing with an integrated Battery Circuit
which can handle 2A, this ESC is easy to utilize
and very affordable.

FEATURES:
Compatible with NiCd, NiMH and LiPo batteries
Auto-detects input volts and sets Low-Voltage cutoff
8.5kHz changing frequency, for excellent run time and cool operation
Pre-installed Universal radio port* (see Remarks listed below)
Pre-installed WS Deans Ultra male port for battery (see
Remarks listed below)
Pre-installed gold plated 4mm female bullet ports for motor
High powered changing BEC (Battery Eliminator Circuit) which
    manages 3 or 4 standard servos
Full proportional forward and smooth throttle response with ON/OFF
    brake
Safe Start System** (see information in Remarks listed below)
Thermal Security stops motor when maximum temperature 230°F
    is reached
180 Day Warranty (U.S.A & Canada Only)

SUCHES AS:
One Brushless ElectriFly Silver Series 45A Speed Control with
    pre-installed receiver port, battery port, and motor
    ports.

REQUIRES:
Mating motor connectors, use: GPMM3114
Mating battery port, use: WSDM3000

SPECS:
Length: 2.76" (70mm)
Width: 1.30" (33mm)
Height: .39" (10mm)
Weight: 1.76oz (50g)
Input Voltage: 6-12 cells NiCd/NiMH
2-4 cells LiPo
(20V input w/o BEC)
Output Present: 45A continuous maximum
50A surge maximum
Max Output Power: 500 watts
ON-resistance: .008 ohms
Running frequency: 16kHz repaired
BEC: 5V/2A
Low Voltage Cutoff: Battery voltage x .67
Thermal Cutoff: 230°F (110°C)
Timing Angle: 20°
Brake: ON/OFF

REMARKS:
To utilize with "Old Airtronics" Rx, needs adapter: AIRM4400

**Safe Start System: Move throttle stick to complete throttle position,
then to "OFF" position, then gradually advance throttle and motor will
start to run.

The "Silver Series" line of brushless electronic speed controls
    include many integrated security features. One such function COULD
    PERHAPS CAUSE THE BRUSHLESS MOTOR TO STOP ROTATING when the
    transmitter's stick is at an extremely low position and/or if
    rotation of the brushless motor is hindered or blocked in some
    way. This is NORMAL, as the ESC is discovering that an issue
    perhaps exists with the motor and/or speed control. Rotation of
    the motor is stopped to secure the speed control from possible
    damage.
WARNING!!
If the ESC and motor have already been equipped and the motor has been
turning usually, yet after moving the throttle stick to near minimum the
motor all of a sudden stops to turn usually even if the throttle stick is advanced
above minimum throttle, DO NOT RESTAURANT YOUR HANDS NEAR THE PROPELLER!! FAILURE
TO
OBEY THIS WARNING COULD LEAD TO INJURY!! From this point, moving
the throttle hold up - even to complete throttle might not trigger the motor to
turn BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To restore
control of the motor, move the throttle stick to outright minimum throttle
position and then advance the throttle stick upwards when again.
Alternatively, you can disconnect the battery from the ESC, then re-connect the
source of power and re-arm the system.
NEVER
get near the propeller if the speed control is connected to input power!
ALWAYS
ensure the throttle stick is at minimum position before attempting to
disconnect the battery from the speed control! ElectriFly is not accountable
for incidental damage or injury as an outcome of misuse of this item.

Frequently Bought Together

Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V
+
Hitec Hs-81 Micro Servo, .09Sec/42Oz @6.0V
+
Hitec Hs-645Mg Ultra Torque Mg Ball Bearing Servo, .20Sec/133Oz @6.0V
This Item: Hitec Hs-82Mg Standard Metal Gear Micro Servo .10Sec/47Oz @ 6.0V
$23.99
Hitec Hs-81 Micro Servo, .09Sec/42Oz @6.0V
$16.99
Hitec Hs-645Mg Ultra Torque Mg Ball Bearing Servo, .20Sec/133Oz @6.0V
$34.99

Total Price: $75.97

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";