Hangar 9 UltraCote ParkLite - Silver

Summary

Garage 9 is bringing its UltraCote® line of covering to indoor and outdoor electrical lightweight airplane with ParkLite®. UltraCote has actually proven itself to be the premier brand within the market and the preferred choice for modelers planning to finish their balsa airplane tasks. At 13 microns thick, ParkLite is the perfect option for lightweight airplane and will be readily available in 16 popular UltraCote colors.

Weight: 1.07 ounces per square yard (36 grams per square meter)



Application Temperatures

Adhesive activation

At 200 degrees F the adhesive on ParkLite ends up being active, enabling the covering to be connected to the design. While 200 degrees F will totally bond the to the design, it is well listed below the temperature level that causes ParkLite to diminish. This is exactly what's required when very first connecting covering to the design to prevent the covering from distorting.

Shrink Start temperature level - 280 degrees F

At 280 degree F ParkLite starts to diminish. This is called the diminish start point. After the covering is attached utilizing an iron set to 200 degrees F, the next step is to diminish the covering. This initial shrinking is finished with the iron set at 280 degrees F.

Maximum Shrinking Temperature - 350 degrees F

At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature level above this will not cause it to diminish more.

This covering is not suitable for foam designs due to the fact that of the high shrinking temperature.

Please checked out the guidelines consisted of with each roll of ParkLite for the complete application guidelines and pro-user tips.

Specifications

Length: 78 in (2m)
Width: 23.5 in (600mm)
Weight: 1.07 ounces per square yard (36 grams per square meter)