JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Hangar 9 UltraCote Lite, Transparent Red (Hangar 9 U966 | HANU966)

Model: Hangar 9 U966
Dist. #: HANU966   SKU: HANU966

Be the first to review this product. (Write Review)

Out of stock

List Price:  $28.99
Price:  $18.99
You Save:  $10 (34%)

This item will earn you 19 reward point(s).
19 points = $0.38 off your next order. Learn More

Updated on Mar 28, 2024 05:44:41 PM

UltraCote Lite, Transparent Red...

Features



High tech polyester coveringUnique multi temperature-controlled adhesive shrinkage systemVersatile and easy to applyPatented polymerizing procedure permanently merges the color to the polyester film covering, eliminating the possibilities of color-layer separation and allows repositioning of the covering on your model.Light weight at .12 oz/sq. ft.Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.




Summary


Hangar 9 UltraCote® is a high tech polyester covering that includes a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing procedure permanently merges the color to the polyester film covering, eliminating the possibilities of color-layer separation and allows rearranging the covering on your model. UltraCote's distinct ability to both shrink and extend make it superior to other coverings for going around tight curves and wingtips.
 
Temp varieties are as follows:

Adhesion to wood starts at 200 to 220 degrees F.
Shrinking beginning starts at 300 degrees F.
Optimum shrinkage is at 350 degrees F.



 



Surface Preparation:

The covering task can just be as excellent as the finish of the surface area it's used over. In order for the covering to properly stick to a surface, the surface area needs to initially be smooth and clean. Sand the model using a sanding block and gradually finer sandpaper, with the last sanding being maded with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unpleasant bumps. Fill spaces and dents with a top quality filler. If using light-colored UltraCote® (such as white or yellow), utilize a tan-colored filler that matches the wood color to prevent the filler from revealing through.


Pro Suggestion - Some professional home builders “raise the grain” then sand a second time with 320 or 400 grit paper for the supreme finish. After the model is sanded, utilize a wet cloth to wipe down the model. Some modelers prefer to utilize a fine-mist squirt bottle filled with water to dampen the surface areas to be covered. As the surface area dries, inserted wood fibers in the surface area will “stand up.” When dry, sand the surface areas once again using 320 or 400 grit paper. Raising the grain now and sanding it off will prevent the grain from raising later on under the covering, developing a rough finish. Vacuum the model completely and prevent touching the model with oily hands.Your model is now prepared for covering!



Trim Movie to Size:

Start by covering the bottom of one wing half. Using scissors or sharp pastime knife, cut a piece of UltraCote® a couple of inches larger than had to cover the wing. Get rid of the backing (conserve for later on) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature level of 220°F.


Pro Suggestion - If the iron you're using does not show the real temperature level, here is an idea that will ensure your iron is properly set.Water boils at 212°F. Allow your iron to heat up at a medium setting. When the iron reaches its stabilized temperature level, thoroughly pour a couple of drops of water on the iron's surface area. Change the temperature level until the water simply starts to boil off. This technique is surprisingly accurate and is typically within 10° (of the exact application temperature level of 220).



Adding Covering to Spar:

Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is extremely recommened). Gently pull the covering towards the root and towards the suggestion, as you work the iron from the center of the spar to the root and suggestion of the wing. Press gently with the iron, enabling the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface area with a minimum of wrinkles.



Covering a Solid-Sheeted Wing:

If covering a solid-sheeted wing, work from the center of the spar external to the tracking edge and then to the leading edge as shown, using the iron at 220°F. If a wrinkle develops, the covering can be thoroughly raised and reapplied.



Covering an Open-Structure Wing:

If covering an open-structure wing, work from the spar towards the tracking edge, gently sliding the iron (set at 220°) towards the tracking edge with the iron getting in touch with two ribs. Using your iron, adhere the covering to the remaining ribs, pursuing the suggestion and the root. Now finish the open structure leading edge, using the very same technique. If the leading edge is sheeted, then follow the strategy listed above under “Covering a Solid-Sheeted Wing.”



Sealing the Edges:

With the iron set to 220°F, seal the leading and tracking edges. Using a straight edge and a sharp #11 pastime knife, thoroughly trim the excess covering from the leading and tracking edge, enabling a minimum of a 1/4" overlap to twist around the leading and tracking edge of the wing. Now seal the leading and tracking edges firmly with the covering iron.



Wing Suggestion:

Depending on the quantity of the curvature of the wing suggestion, high heat (as much as 350°F) may be had to shrink and extend the covering to get rid of all the wrinkles. Preset the iron to 300°F. Pull and extend the covering around the wing suggestion while applying heat with the iron. Remember, UltraCote® can be thoroughly raised and rearranged to help get rid of wrinkles. This function is beneficial, specifically when covering dramatically curved wing tips. Continue working, pulling, and heating the covering around the suggestion until the covering is past the center of the suggestion. It may be required to increase the temperature level of the iron to accomplish higher shrinkage to get rid of all wrinkles. Trim the excess covering using a #11 pastime knife, then reseal the covering on the wing suggestion.


Pro Suggestion - If sealing the covering in tight areas such as corners or fillets, using the Wall mount 9 ProTrim Sealing To







Specifications


Length: 6.5' (78")
Width: 23.5"
Weight: .12 oz per square foot









Frequently Bought Together

Hangar 9 UltraCote Lite, Transparent Red
+
Hangar 9 UltraCote Lite, Transparent White
This Item: Hangar 9 UltraCote Lite, Transparent Red
$18.99
Hangar 9 UltraCote Lite, Transparent White
$18.99

Total Price: $37.98

Add Both To Cart

Customers who bought this product also purchased

Visual Parts Finder
What's New?
";