Hangar 9 Ultra Stick 30cc ARF

Features



Impressive flight performance: attempted and true Ultra Stick designFlaps for expanded flight envelopeCovered in real UltraCote™Tail dragger landing equipment adds to its sportier looksLarge, double diagonal control surfacesTwo piece plug in wings with aluminum tube offers simple transport and assemblyLightweight balsa/balsa-plywood building that's strongFloat-ready—hard points for installing the Garage 9® 1/5-scale Float Set (offered independently) are currently built into the fuselageFinished fiberglass wheel trousers match UltraCote colorsReady to mount the Development® 33GX Gas EngineElectric motor mount consisted of makes it EP friendlyComplete quality hardware consisted of




Introduction


The very first Garage 9® Ultra Stick™ ARF changed the Stick category with ingenious design twists that really spiced up performance such as a big, double diagonal control surface area for 3D flight, extra-large control surfaces and optional quad flaps. Structure on the tradition of this popular design, the Ultra Stick 30cc ARF offers intermediate to professional pilots a giant-scale sport airplane with a broad flight envelope. It includes resilient building and an abundance of power alternatives so you can make it as mild or wild as you desire. As with its predecessors, the flaps and ailerons are double-beveled so you can make the most of flaperon and crow blends. These control surfaces, together with the rudder and elevator, have actually been extra-large for even better 3D capability than before. Hardware and installing alternatives for gas and electric power are consisted of. You can even add floats (offered independently). Delight in an envigorating blend of sport-flying fun with this wonderfully crafted ARF that more than measures up to its name.

Video Introduction









Requirements


Wingspan: 80.75" (205 cm)
General Length: 74" (188 cm)
Wing Location: 1360.3 sq in (87.76 sq dm)
Flying Weight: 12-14 pounds (5.4 - 6.35kg)
Engine Size: 30cc
Motor Size: Power 160
Radio: 6ch
Servos: A6180 Digital Aircraft Servo
Trim Plan Colors: White, Black, Apple Green
CG (center of mass): 4-5.25" Rearward of wing leading edge
Wing Loading: 22.02oz./sq.ft.
Prop Size: 17x6 - 18x10
Spinner Size: 3"
Speed Control : 80 amp
Recommended Battery: (Motor)10S 4400mAh (Receiver) 6.6V 2200mAh TWO LiFe
Aileron: Expo 25%
Elevator: Expo 20%
Rudder: Expo 20%
Flaps: Y
Withdraws: N
Control Toss (Ailerons): (Low) 3cm Up and 2.5cm Down (High) 6.8 Cm Up and 5.5cm Down
Control Toss (Elevator): (Low) 2.7cm Up and Down (High) 5.5cm Up and Down
Control Toss (Rudder): (Low) 3.5cm Left and Right (High) 7 cm Left and Right
Control Toss (Flaps): 2.5mm Departure and 5.5cm Landing
Approximate. Flying Duration: 6 Mins
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes





Media Gallery





 View Image Gallery