Hangar 9 Christen Eagle II 90 ARF

Features

Light-weight balsa/plywood construction
Outstanding scale overview
Multi-color Eagle UltraCote® trim scheme
Painted fiberglass cowl and wheel pants
Created for radiance or electrical power
Large, easy-access top hatch
Cockpit information and pilot figure included
All hardware included
Wing transport frames included

Introduction

Presented in 1977, the Christen Eagle II was the creation of passionate aerobatic pilot and business owner,
Frank Christensen. His concept? Give pilots a refined, aerobatic set aircraft almost anybody could build.
The sporty little two-seater was so popular that a somewhat customized, single-seat version
ended up being the aircraft of choice for one of the best aerobatic demonstration groups of all time –
Charlie Hillard, Tom Poberezny and Gene Soucy, otherwise known as The Eagles. The trio flew the
aircraft from 1979 through 1995, thrilling millions at air reveals all over the world.

The Garage 9® Christen Eagle II 90 ARF remarkably captures the spirit of this amazing airplane. Constructed of top
quality balsa and light plywood, it will eagerly carry out extreme aerobatics similar to its major inspiration utilizing your
choice of radiance or brushless electrical power alternatives. And it comes out of package with a level of scale fidelity that really
sets it apart from the remainder of the sport model crowd.

If you’re a sport flier ready for more advanced airplanes or an aerobatic pro trying to find an enjoyable, sport scale model, the Christen Eagle II 90 has exactly what you’re after.



You will need...
4-cycle Setup:
- 4+ channel Transmitter and Receiver radio system
- Engine
- Propeller
- Radiance Plug
- Fuel
- Receiver Battery
- (5) Requirement Servos
Electric Setup:
- 4+ channel Transmitter and Receiver radio system
- Motor
- ESC
- (2) 4000mAh+ 30C 4S LiPo Batteries
- LiPo-compatible Battery charger
- Propeller
- (4) Requirement Servos

Requirements

Wingspan: 54.0 in (137 cm)
General Length: 50.8 in (129 cm)
Wing Area: 878 sq. in. (56.7 sq. dm.)
Flying Weight: 8.50 - 10.0 lb (3.85 - 4.50 kg)
Engine Size: .75 - .91 2-stroke; 1.15 - 1.25 4-stroke
Motor Size: Power 90
Radio: 4 channel radio system minimum
Servos: 5 standard size servos needed (4 for EP)
Cut Plan Colors: UltraCote White, Deep Blue, Orange, Black, Smoke Purple, Crimson, Flame Red, Dark Yellow, Intense Yellow
CG (center of gravity): 5 to 5-1/2 inches behind the leading edge of the upper wing at center
Wing Loading: 22.3-26.2 oz/sq feet (67.9-79.3 g/sq dm)
Prop Size: Saito 125: 16 x 6; Power 90: 17 x 8E
Spinner Size: 2.75 inch
Speed Control : 75-Amp
Suggested Battery: 14.8V 4000mAh 4S 30C LiPo x2
Flaps: No
Retracts: No
Control Toss (Ailerons): Low: 15mm up/down, 33% expo; High: 22mm up/down, 42% expo
Control Toss (Elevator): Low: 25mm up/down, 30% expo; High: 35mm up/down, 42% expo
Control Toss (Rudder): Low: 35mm right/left, 35% expo; High: 45mm right/left, 45% expo
Minimum Age Suggestion: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes