Hangar 9 Christen Eagle II 90 ARF

Features

Light-weight balsa/plywood building and construction
Outstanding scale outline
Multi-color Eagle UltraCote® trim scheme
Painted fiberglass cowl and wheel pants
Designed for radiance or electrical power
Large, easy-access leading hatch
Cockpit details and pilot figure consisted of
All hardware consisted of
Wing transportation frames consisted of

Introduction

Presented in 1977, the Christen Eagle II was the creation of passionate aerobatic pilot and entrepreneur,
Frank Christensen. His concept? Give pilots an improved, aerobatic package airplane practically anybody could build.
The stylish little two-seater was so favored that a slightly customized, single-seat version
ended up being the airplane of choice for among the best aerobatic presentation teams of perpetuity –
Charlie Hillard, Tom Poberezny and Gene Soucy, otherwise referred to as The Eagles. The trio flew the
airplane from 1979 through 1995, thrilling millions at air shows all over the world.

The Hangar 9® Christen Eagle II 90 ARF brilliantly catches the spirit of this amazing aircraft. Constructed of leading
quality balsa and light plywood, it will excitedly perform extreme aerobatics just like its full-blown inspiration using your
choice of radiance or brushless electrical power alternatives. And it comes out of the box with a level of scale fidelity that truly
sets it apart from the remainder of the sport model crowd.

If you’re a sport flier all set for more advanced planes or an aerobatic professional searching for a fun, sport scale model, the Christen Eagle II 90 has what you’re after.



You will need...
4-cycle Setup:
- 4+ channel Transmitter and Receiver radio system
- Engine
- Prop
- Glow Plug
- Fuel
- Receiver Battery
- (5) Requirement Servos
Electric Setup:
- 4+ channel Transmitter and Receiver radio system
- Motor
- ESC
- (2) 4000mAh+ 30C FOUR LiPo Batteries
- LiPo-compatible Battery charger
- Prop
- (4) Requirement Servos

Specifications

Wingspan: 54.0 in (137 cm)
General Length: 50.8 in (129 cm)
Wing Area: 878 sq. in. (56.7 sq. dm.)
Flying Weight: 8.50 - 10.0 lb (3.85 - 4.50 kg)
Engine Size: .75 - .91 2-stroke; 1.15 - 1.25 4-stroke
Motor Size: Power 90
Radio: 4 channel radio system minimum
Servos: 5 basic size servos needed (4 for EP)
Trim Scheme Colors: UltraCote White, Deep Blue, Orange, Black, Smoke Purple, Deep Red, Flame Red, Dark Yellow, Intense Yellow
CG (center of gravity): 5 to 5-1/2 inches behind the leading edge of the upper wing at center
Wing Loading: 22.3-26.2 oz/sq ft (67.9-79.3 g/sq dm)
Prop Size: Saito 125: 16 x 6; Power 90: 17 x 8E
Spinner Size: 2.75 inch
Speed Control : 75-Amp
Recommended Battery: 14.8V 4000mAh FOUR 30C LiPo x2
Flaps: No
Pulls back: No
Control Toss (Ailerons): Low: 15mm up/down, 33% expo; High: 22mm up/down, 42% expo
Control Toss (Elevator): Low: 25mm up/down, 30% expo; High: 35mm up/down, 42% expo
Control Toss (Rudder): Low: 35mm right/left, 35% expo; High: 45mm right/left, 45% expo
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes