Great Planes Silicone Fuel Tubing Standard 3'

    Great Planes Standard Fuel Tubing is perfect for .10-.60
radiance fuel powered engines.

FEATURES:
Silicone building

CONSISTS OF:
One 3' length of fuel tubing

SPECS:
Inside diameter: 3/32"
Outside diameter: 3/16"
Length: 3'

COMMENTS:
Likewise readily available in a 50' roll by ordering GPMQ4141

This item compliments the above reviewed item.

12x8 Sport Propeller

This is a 12x8 Plane Propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building decreases turning mass
    for greater output and longer life.
Reinforcing carbon fibers help keep true, continuous pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props need balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12" Pitch: 8
Thickness at center: 1/2" Hole diameter: 1/4"

COMMENTS:
The "C2" stand for the production run number.

This item is often bought with the above mentioned item.

3' Medium Tygon Gas/Diesel Tubing 3/32" Inner Diameter

This is 3' of 3/32" DuBro Tygon Fuel Tubing.

FEATURES:
Yellow Tygon Tubing
For gasoline or diesel fuel only
Will not solidify or split, and stays versatile
3/32" ID fuel tubing

CONSISTS OF:
3 feet of 3/32" ID fuel tubing

SPECS:
Length: 3"
Inner Size: 3/32"

You will love this product if you have the product above stated.

Fuel Line Clips For Medium 3/32" Inner Diameter Tubing

This is a plan of (4) 3/32" inside diameter fuel line clips.

FEATURES:
Great for simple connections in between fuel lines and fuel filters.

INCLUDES:
Four 3/32" fuel line clips

NEEDS:
installing onto fuel line.

SPECS:
Inside diameter: 3/32" (Medium sized fuel tubing)

Below is a wonderful item that many others have actually bought at the very same time.

2' Super Blue Silicone Tubing Medium (3/32" Id)

This Is 2 Feet of Medium Super Blue Silicone Tubing from Du-Bro.

FEATURES:
For Glo-Fuel only.
Won't crack or harden.
Fits firmly on fuel fitting.
This is a good size for .10 thru .60 size engines.

INCLUDES:
2 Feet of Medium Super Blue Silicone Tubing

NEEDS:
Fuel Fitting
Glo-Fuel

SPECS:
Inner Size: 3/32" (2.3mm)
Length: 2'

Want one more wonderful item to match the above mentioned item?



Developed for nitro buggy and truck racing, this is the R3 Medium
Glow Plug from HPI.

FEATURES:
Medium heat range
Unique blend of platinum and iridium metals
Standard plug design (no idle bar)

CONSISTS OF:
One radiance plug
One brass spacer

NEEDS:
Setup into the engine with a 4-way wrench

SPECS:
Height: .70" (17.8mm)
Thread size: 1/4-32

COMMENTS:
HPI recommends this plug for their 12R XS engine however will operate in any
engine that requires a medium heat range radiance plug.

The listed below item also pairs actually well with the item being reviewed.



    This is a Hand Operated Fuel Pump for Transferal of
Glow Fuel from a Fuel Storage Bottle Into An R/C Design.

*** One-Year Service warranty ***

FEATURES:
For usage with Radiance Fuels.
Ergonomic design is more comfy to hold.
Allows high-speed filling and emptying.
Extremely smooth gear mesh guarantees years of trouble-free use.
Special high-quality pump system resists leakage.
Can be mounted on a feild box using 2 (consisted of) installing screws.
Outer case and handle made of gray plastic.

INCLUDES:
One Hand Crank Fuel Pump
One Filler Nozzle
One Filtered Fuel Can Pick-Up
Two Self-Tapping Mounting Screws
One Direction Header Card

NEEDS:
Fuel Can Fittings, use GPMP4155.
3/32" Fuel Tubing, usage GPMQ4131 or Recoil Fuel Tubing

SPECS:
Length: 4-1/8"
Width: 2-1/4"
Height: 1-1/2"
General Height: 2-3/4" (with handle)

COMMENTS:
This is for Radiance Fuel Only, some inaccurate advertisements state gas & radiance fuel.
Identical in mechanical information to the original version, except for:
    More ergonomic design for comfy hold.
    Delivers 10% more fuel in the same amount of time.
    Re-engineered hand crank is much easier to turn.