Great Planes Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

SUCHES AS:
One Prop Saver
2 Rubber O-Rings
2 Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

Right here is a great thing that numerous others have actually bought at the same time.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with devices)

This thing compliments the above gone over thing.

930Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1800Kv
Max. effectiveness current: 6-10 Amp
NoLoad current / 10 V: 0.8 Amp
Present capability: 16 A/60 s
Max. Efficiency: 74%
Shaft diameter: 3mm

A2208-12 similar to: AXI 2208/20, E-Flite Park 370

This thing compliments the main item here.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 2 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One instruction sheet

REQUIRES:
Assembly onto motor or equipment drive system in your Electric plane.
Balancing

SPECIFICATIONS:
Size: 6"
Pitch: 4
Hub inner diameter: 0.25"

COMMENTS:
Use Speed 400 Electric motors.

Right here is a great thing that numerous others have actually bought at the same time.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building minimizes rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring instruction sheet

REQUIRES:
ALL props need balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

COMMENTS:
Slo-Flyer props are Not created for Radiance engines

Right here is another thing that compliments the thing being gone over.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For utilize on electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite building
Features 2 adapter rings that adapt to various motor shafts

SUCHES AS:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is REALLY crucial, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 6
Hub inner diameter: 0.25" (6.3mm)