Great Planes RimFire .15 35-36-1200 Outrunner Brushless Motor

This is the Excellent Planes ElectriFly RimFire .15
35-36-1200 Brushless Outrunner Electric Motor.

FEATURES:
For Sport planes approximately 4lbs (1815g) and 3D planes approximately 2.5lbs
    (1135g)
Developed for explosive acceleration and optimum torque
Lightened aluminum can homes high torque rare earth Neodymium
    magnets
Double shielded bearings
Virtually maintenance-free; no commutators or brushes to wear out

INCLUDES:
Great Planes ElectriFly RimFire .15 35-36-1200 Brushless Outrunner
    Electric Motor with prop adapter (GPMQ4903), motor mount and 3.5mm
    adapters

REQUIRES
SS-45 ElectriFly Brushless Speed Control (GPMM1840)
Propeller: 10 x 7 - 11 x 7

SPECIFICATIONS:
Can Size: 1.38" (35mm)
Can Length: 1.42" (36mm)
Shaft Size: .16" (4mm)
Shaft Length: .65" (16.5mm)
RPM/V (kV Score): 1200
Weight: 3.6oz (102g)
Input Voltage: 11.1-14.8V (3-4S LiPo)
Max. Constant Current: 45A
Max. Rise Current: 55A
Burst Watts: 650
No Load Current: 1.8A

COMMENTS:
The three-number classification refers to Motor Size, Motor Length
    and kV Score.

Want one more wonderful item to match the above mentioned item?



This is the ElectriFly Silver Series 45 amp Brushless Electronic Speed Control.
Great for larger high performance planes. Providing
45A of constant existing with a built-in Battery Circuit
which can manage 2A, this ESC is easy to use
and extremely affordable.

FEATURES:
Suitable with NiCd, NiMH and LiPo batteries
Auto-detects input volts and sets Low-Voltage cutoff
8.5kHz switching frequency, for good run time and cool operation
Pre-installed Universal radio adapter* (see Remarks listed below)
Pre-installed WS Deans Ultra male adapter for battery (see
Remarks listed below)
Pre-installed gold plated 4mm female bullet adapters for motor
High powered switching BEC (Battery Eliminator Circuit) which
    handles 3 or 4 basic servos
Complete proportional forward and smooth throttle reaction with ON/OFF
    brake
Safe Start System** (see details in Remarks listed below)
Thermal Security stops motor when optimum temperature 230°F
    is reached
180 Day Guarantee (USA & Canada Just)

INCLUDES:
One Brushless ElectriFly Silver Series 45A Speed Control with
    pre-installed receiver adapter, battery adapter, and motor
    adapters.

REQUIRES:
Mating motor connectors, usage: GPMM3114
Mating battery adapter, usage: WSDM3000

SPECIFICATIONS:
Length: 2.76" (70mm)
Width: 1.30" (33mm)
Height: .39" (10mm)
Weight: 1.76oz (50g)
Input Voltage: 6-12 cells NiCd/NiMH
2-4 cells LiPo
(20V input w/o BEC)
Output Current: 45A constant optimum
50A surge optimum
Max Output Power: 500 watts
ON-resistance: .008 ohms
Operating frequency: 16kHz fixed
BEC: 5V/2A
Low Voltage Cutoff: Battery voltage x .67
Thermal Cutoff: 230°F (110°C)
Timing Angle: 20°
Brake: ON/OFF

COMMENTS:
To use with "Old Airtronics" Rx, needs adapter: AIRM4400

**Safe Start System: Move throttle stay with complete throttle position,
then to "OFF" position, then gradually advance throttle and motor will
start to run.

The "Silver Series" line of brushless electronic speed controls
    consist of numerous integrated security features. One such feature COULD
    PERHAPS TRIGGER THE BRUSHLESS MOTOR TO STOP ROTATING when the
    transmitter's stick is at an extremely low position and/or if
    rotation of the brushless motor is hindered or blocked in some
    way. This is NORMAL, as the ESC is discovering that an issue
    perhaps exists with the motor and/or speed control. Rotation of
    the motor is stopped to protect the speed control from possible
    damage.
WARNING!!
If the ESC and motor have actually already been equipped and the motor has been
turning usually, yet after moving the throttle stay with near minimum the
motor suddenly stops to rotate usually even if the throttle stick is advanced
above minimum throttle, DO NOT LOCATION YOUR HANDS NEAR THE PROP!! FAILURE
TO
OBEY THIS CAUTION COULD RESULT IN INJURY!! From this point, moving
the throttle stick up - even to complete throttle may not cause the motor to
rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To gain back
control of the motor, move the throttle stay with outright minimum throttle
position then advance the throttle stick upwards as soon as again.
Alternatively, you can disconnect the battery from the ESC, then re-connect the
source of power and re-arm the system.
NEVER
come up to the prop if the speed control is connected to input power!
ALWAYS
make sure the throttle stick is at minimum position prior to attempting to
disconnect the battery from the speed control! ElectriFly is not responsible
for incidental damage or accident as a result of misuse of this product.