Great Planes Gold Plated Bullet Connector Female 3.5mm (3)

Designed for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Terrific Planes.

FEATURES:
Gold plated
Fits wire diameter up to 3.5mm

CONSISTS OF:
3 female bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Diameter: .14" (3.5mm) inside (where the wire is soldered to)
Diameter: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male port order GPMM3112

Right here is another thing that compliments the thing being gone over.



Designed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
3 male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female port order GPMM3113

Want another great thing to match the above mentioned thing?



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is ideal for all electronic applications.

Regularly gotten with the thing that you are currently checking out.

Heat Shrink Tubing Set, 3/16" (4.7Mm) 8/Pkg

This is a set of 3/16" Diameter Heat Shrink Tubing from Dubro.

FEATURES:
Designed to diminish up to 1/2 of its original size
Suitable for insulating electrical splices, covering electrical plugs
    and adapters

CONSISTS OF:
Four pieces of red heat diminish tubing
Four pieces of black heat diminish tubing

REQUIRES:
Diminish tubing on all sides with heat weapon, butane lighter or soldering
    iron

SPECS:
Diameter: 3/16" (4.5mm)
Length: 1-1/2" (38mm)

COMMENTS:
Use a tubing size that disappears than two times the diameter of the
    things being covered.

Get this thing to enhance the one you read around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Provides a protected connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

Get this thing to enhance the one you read around.



This is 16AWG Red and Black Ultra Wire from Dean's.

FUNCTIONS:
16 gauge
660 strands of pure copper pre-tinned for simple soldering
Deterioration resistance
Highest grade of copper and pure silicone insulation offer maximum
    power and simple soldering

CONSISTS OF:
One red 2' length of ultra wire
One black 2' length of ultra wire

REQUIRES:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

SPECS:
Length: 2' (61cm)

The below thing also sets really well with the thing being gone over.



This is a High Grade, 12 gauge Wire Useable In R/C Products To Bring High
Currents of Electricity.

FEATURES:
12 gauge Wire Has Less Voltage Drop, Due To Less Resistance.
Very Versatile
Wire Made Of Copper

CONSISTS OF:
One 2' red (+) wire
One 2' black (-) wire