Great Planes Double-Sided Servo Tape 1"x3'

Excellent Airplanes double sided foam servo tape works great for installing servos and
receivers to automobile, aircraft and boat models.

FEATURES:
Super sticky adhesive on both sides for safe holding power

INCLUDES:
One roll of double-sided servo tape

SPECIFICATIONS:
Length: 36"
Width: 1"
Thickness: 1/32"

This thing praises the main item right here.

Hs-55 Sub Micro Servo, .14Sec/18Oz @ 6.0V

    This is the Hitec HS-55 Sub Micro (Feather) Servo with a
Futaba J, Hitec S, JR, Airtronics Z-type Connector.

FEATURES:
Really slim case and lightweight for installing in little airplanes,
    electrics or gliders, where extremely high speed and great torque are
    critical.
One of the slimmest micro servos available.
High-strength resin gear train supplies trustworthy operation.

INCLUDES:
One HS-55 Servo w/pre-installed little X-shaped servo horn and screw
One extremely little straight servo horn
One M1.7x3 servo horn screw
One little straight servo horn
Two M1.7x7 servo installing screws

at 4.8V
SPECIFICATIONS:
Speed: 0.17 sec at 60°
Output Torque: 15.27 oz-in (1.1 kg-cm)
Weight: 0.27oz (7.8g)
Length: 0.89" (22.8mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)

Below is a excellent thing that lots of others have bought at the exact same time.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

This thing is often purchased with the above stated thing.



This is a pack of thirty Racers Edge 4" long flourescent green zip tie wraps. Zip tie wraps make an outstanding addition to your pit box, as you can utilize them to protect wires to your chassis, produce pull loops for your fuel tank and carry out fast repair works on the fly throughout a race to your automobile body!

The listed below thing likewise sets really well with the thing being reviewed.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

INCLUDES:
One black female plastic adapter
One black male plastic adapter
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

Want another excellent thing to match the above stated thing?

26T Pinion 48P

This is a 26 Tooth, 48 Pitch Pinion Equipment with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

INCLUDES:
One 26 Tooth, 48 Pitch Pinion Equipment
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outside Size: .58" (14mm)

This thing is often purchased with the above stated thing.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for usage on the
Traxxas Stampede, Rustler, and Outlaw Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Receiver Box
One Rubber Seal
Foam Cushioning
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Direction sheet

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")