Great Planes Cherokee .40-.56 ARF

This is the radio controlled, glow or electric powered, almost-ready-to-fly,
Excellent Planes Cherokee .40 - .56 Sport Airplane.
For Intermediate Flyers planning to go up from a 4-ch trainer.

FEATURES:
Building: Balsa and plywood
Wings: Two-piece with aluminum joiner tube, wing halves install to
    fuselage utilizing two 1/4 - 20 nylon bolts
Covering: Top Flite MonoKote
Radio Compartment: Plywood enhanced, accessible under wing
Cowl: Prepainted fiberglass
Wheel Trousers: Prepainted fiberglass
Canopy: Clear, vacu-formed
Landing Gear: Tricycle type with pre-bent wire 0.16" (4mm) size
Wheels: 3 foam 2.5" (64mm) size
Aileron Control: Double servo
Fuel Tank: 14oz (420cc) approximate
Spinner: 2" (51mm) size plastic construction, red in color
Hardware: Full set included
Structure Time: 4 - 6 hours
Motor Mount: Two-piece, composite construction
Service warranty: Great Planes Model Production Business guarantees this
    package free from problems in both materials and workmanship at date
of purchase.

INCLUDES:
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
    pre-bent primary and nose equipment, wheels, wheel pants, cowl, engine
    install, fuel tank, wood servo trays, spinner, aluminum joiner tube
    pilot figure, decal sheet, hardware bundle and photo-illustrated
    instructions

NEEDS:
Engine:.40-.46 (7 - 7.5cc) 2-stroke
OR .52 - .56 (8.5 - 9.2cc) 4-stroke

OR 42-50-800kV brushless outrunner electric motor
For a brushless motor installation, one 3200mAh 11.1V
LiPo battery pack and one 3200mAh 7.4V LiPo battery pack
linked in series, cell balancer and LiPo suitable battery charger
are needed. Order numbers are provided below:
Excellent Planes LiPo 7.4V 3200mAh 20C Discharge w/Balance
Great Planes LiPo 3200mAh 11.1V 20C Discharge w/Balance
Great Planes Series Deans U 2 to 1 adapter (GPMM3143)
Great Planes ElectriFly Equinox Cell Balancer (GPMM3160)
LiPo suitable battery charger such as the Great Planes PolyCharge4
(GPMM3015)
Medium brushless motor install (GPMG1255)

Muffler: Pitts design if installing two-stroke glow engine
Radio: 4-Channel minimum with blending capability chose
Servos: 4 minimum standard size and torque 44 oz.-in.(3.2 kg-cm)
Functional flaps need two extra servos
Throttle for glow engine needs extra servo
Servo Extension: Two 9" (229mm) for aileron servos

Y-Harness: 1 (For aileron servos)
Misc. Items: Glow plug, 1/4" foam rubber cushioning, medium fuel tubing,
    fuel filter, propeller, based upon engine selection.

SPECS:
Wingspan: 60" (1520mm)
Wing Location: 606 sq in (39 sq dm)
Weight: 6.75 - 7.25 lb (3060 - 3290g)
Length: 46" (1170mm)
Airfoil: Semi in proportion, low wing positioning
Center of Gravity: 3-1/16" (78mm) Back from the wing's leading edge
Control Tosses: Low Rate High Rate
    Elevator: Up & Down 3/8" (9.5mm) 16° 1/2" (13mm) 21°
    Rudder: Right to Left 5/8" (16mm) 17° 1-1/4" (32mm) 34°
    Ailerons: Up & Down 7/16" (11mm) 10° 1" (25mm) 24°
    Flaps: Full 9/16" (14mm) 24°
Half 5/16" (8mm) 13°

COMMENTS:
Following are the Top Flite MonoKote colors utilized to cover this
model and order numbers for 6 foot rolls;
White (TOPQ0204) Black (TOPQ0208)
Real Red (TOPQ0227)

If a replacement fuel tank is needed, buy the Sullivan 14oz
    Flextank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).