Great Planes Charge Lead Banana Plugs/Micro

This is the Great Planes Charge Lead
with Banana Plugs and Dean's Micro Connector.

FEATURES:
Charges a battery with a Dean's Micro connector

CONSISTS OF:
One Great Planes Charge Lead w/ Banana Plugs & Dean's Micro connector

REQUIRES:
Linking in between battery and charger

SPECIFICATIONS:
Maximum Recommended Current: 10A
Port #1: Banana Plugs
Port #2: Dean's Micro (Unfavorable (-) Pin)
Wire: 16AWG 150mm (5.9") long
Weight: 21.15g (.75oz)

Regularly gotten with the thing that you are currently reviewing.



This is the Method AnyLink2 2.4GHz Radio Adapter.

**Not suitable with the Futaba 7C 2.4GHz Radio Systems.**

FEATURES:
Changes airplane transmitter into a frequency-hopping, spread-
    spectrum system utilizing SLT (Secure Link Technology)
Compatible with most airplane transmitters with a working trainer
    jack, including Airtronics, even non-2.4GHz transmitters
    Transmitter Compatibility Chart;
    http://www.tacticrc.com/anylink/anylink2-chart.html
Enables transmitter to fly all Tx-R (Transmitter Prepared) airplane, and
    any airplane with a 2.4GHz SLT receiver, including huge scale
    airplane, park flyers, and helis utilizing radiance, electrical, or fuel
    power
Easy mapping, just push MODE button till LED appears opposite the
    letter code for user's radio
Three adapter cables geared up with headphone-type ports for
    easy plug-in setup
One year limited service warranty beginning at date of purchase. This
    service warranty does not cover damage caused by abuse, misuse, alteration,
    or accident

CONSISTS OF:
AnyLink2 2.4GHz Radio Adapter
1ST 3.7V 450mAh LiPo battery, TACP0011
Cable A, JR, Spektrum, Graupner, TACM0010
Cable B, Futaba Square, TACM0011
Cable C, Spektrum, Hitec, TACM0012
TC10 USB Charger, TACP0010
Two Hard Locking Adhesive Strips
Instruction Sheet

REQUIRES:
Charging battery with consisted of USB charger before use
Airplane transmitter with DSC or trainer jack

SPECIFICATIONS:
Compatible Receivers: Method 2.4GHz, Tx-R airplane, receivers having
    SLT protocol
Frequencies: 2.403-2.479GHz
Modulation: FHSS spread spectrum
Flight Range: Complete range
Input Power: 3.30 - 4.20V, 25mA
Power Control: Automatic with inbound signal recognition
Power On Indication: Red LEDs with audible tones
Low Voltage Alarm: Audible tones at 3.25V
Inactivity Alarm: Tones noise after 5 minutes of transmitter activity
Output Power: < 0.1W
Case Dimensions: 2.68 x 1.46 x 0.98" (68 x 37 x 25mm)
Weight: 1.62oz (46g)

REMARKS:
Adapter cables for the initial AnyLink and the AnyLink2 are not
    cross compatible.
AnyLink2 is just suitable with SLT receivers such as those from
    Method.