GPM Racing V8 LS3 ENGINE RADIATOR FOR TRX-4 DEFENDER (COLOR VERSION) -1PC

Part location: Motor location

Item major functions & use: A good decoration part to cool down the engine.

Accessories:

Engine Radiator 1pc

Major benefits of updating to this part/product :

1. Built-in temperature level sensing unit, control fan on or off immediately.

2. High-speed fan for high airflow - as much as 3.25CFM (±10%).

3. Product: Main body: Aluminum + stainless-steel. Cover + tire pipe: Black heat resistant ABS plastic.

4. Temperature sensing unit: Power supplies at 35°C (± 5 ° C). Reset at 25°C (± 5°C). Temperature sensing unit is welded to the fan.

Other special notes and remarks:

Measurements: 52mm x 63mm x 71mm

When set up on TRX-4 Defender:

1. The manifold side needs to be removed to have adequate room for setup.

2. The crossbar on initial body post needs to be trimmed to the position of the consumption pipe in order for setup (see photo).

If you have modified the engine to a front engine setting:

1. Get rid of the manifold and install it directly on the initial damper mount and fender.

2. To set up the manifold, you should use GPM Racing #TRX4028 front damper mount or other flat style mounts to have adequate room for the left and best manifolds.