FMS F35 PNP V2 64mm Fan

Overview


Functions

280mm fiber pipe inserted through the fuselage and primary wing
Use of 4 inner-hexagon screws rather of glue improves primary wing set and landing equipment installation optimizing strength of structure
Improved primary wing set and landing equipment installation. This enhances strength of structure and decreases assembly time
More effective 64mm 11-blade ducted fan with approximately 800 grams of thrust
2840-KV3900 motor
Five 9g servos
Predator 40A ESC
FMS EPO foam material produces stronger, more impact-resistant aircrafts
Environmentally friendly water-based paint minimizes blistering from sun
Pre-installed, freshly designed control horns allows more throw

Had to Total

Exactly what's in package?

4+ Channel Radio System
LiPo Battery and Battery charger

(1) F-35 V2 64mm
(1) User Handbook

Overview

Inspired by the exceptional functions of the initial design, variation 2 (V2) of the FMS F-35 64mm has improved mechanical and structural functions that will boost air efficiency and decrease assembly time.
A fiber pipe greatly enhances the wing strength for boosted flying maneuvers. An enhanced primary wing set and landing equipment installation enhances strength of structure and decreases assembly time.
Plus, the current 64mm ducted fan can attain more than 800 grams of thrust.
The distinctions in speeds in between the V1 and V2 will be noticeable. If you have actually got the “requirement for speed,” devices such as missiles can be eliminated to develop a faster, more streamlined design.







Specifications


Wingspan: 27.5 in (698mm)
Total Length: 37.8 in (960mm)
Flying Weight: Roughly 32.5 oz (920g)
Motor Size: Brushless 2840-KV3900 with 64mm Fan Unit
Servos: 9G Servo - (5)
CG (center of mass): 3.6 - 3.8 in (93-98mm) From Leading Edge
Speed Control : 40A
Recommended Battery: Li-Po 11.1V 2200mAh 35C
Aileron: Yes
Elevator: Yes
Rudder: Yes
Throttle: Yes
Flaps: No
Retracts: No
Assembly Time: Less than 1 Hour