FMS P-51D, Red Tail, V8, PNP, 1450mm

Functions

Made of Long Lasting EPO Foam
Updated landing equipment featuring slower scale like action
Shock absorbing struts with 4mm size lower area
FMS sequencer which closes the equipment doors after equipment is down
Detachable sliding battery tray
Updated Horizontal and Vertical stabs with hard points for glue less assembly (Note: New V8 tails surface areas will not fit on the older variations of the P-51)
9g & 17g Digital Metal Equipment Servos
Moving canopy
Outdoors intake
70A ESC with 5a SBEC
FMS gold PAEP motor

Introduction

FMS is and will constantly be dedicated to developing the very best foam aircraft worldwide. The latest variation (V8) makes the historic P-51D much more attractive. Though the changes are not that substantial, it shows our serious mindset to our products, and our continuing pursuit towards perfection

Numerous consider the P51 as one of the most fantastic warbird's and want to have one in their collection. If you are one of the many, then the FMS 1400mm P-51D V8 is the ideal one for you. Our company believe that the existing 1400mm P-51D V8 is one of the finest RC foam planes the world over.

Specifications

Wingspan: 57 in (1450mm)
Overall Length: 49 in (1240mm)
Wing Area: 553.35 sq in (35.4 sq dm)
Flying Weight: Approximately 2,350g
Motor Size: Brushless 4250-KV540
Radio: 6+ Channel reccomended
Servos: (6) 9G Servo, (3) 17G Servo
CG (center of mass): 4.3 in (110mm) From Leading Edge
Wing Loading: 0.15oz/sq in (66g/sq dm)
Prop Size: 14x8
Speed Control : 70A with 5A SBEC
Advised Battery: Li-Po 14.8V 2600mAh 25C
Aileron: Yes
Elevator: Yes
Rudder: Yes
Throttle: Yes
Flaps: Yes
Withdraws: Yes
Approx. Flying Period: 8 minutes
Charger: Not Included
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes