E-Flite UMX A-10 BL BNF Basic

Features



Twin 28mm ducted fans with effective|effective} 13,500Kv BL motorsBest-in-class maneuverability and powerThe stability and precision of AS3X® technologyIncredible scale outlineFull 4-channel control with practical dual ruddersClear canopy with pilot figureNose cannon, weapon pylon and panel-line detailsRare “Flipper” camo trim schemeRemovable landing gear with steerable nose wheel




Introduction


Unlike stealth airplane that get enemies anonymously or from a distance, the A-10 Warthog is designed to get up close and individual with its targets. Its mere appearance over the battlefield suffices to send out many opponent ground forces running for cover, especially if they’ve ever gotten a taste of its 30mm nose cannon – a weapon so powerful, it can shred through the armor of a tank with a single burst. This awesome firepower, combined with its capability to turn on a dime and remain on station while taking massive quantities of damage, has actually made the A-10 America’s leading close air support fighter for over 40 years.

With the UMX™ A-10, you can finally delight in an ultra micro RC replica of the magnificent Warthog that does its legend justice. It completely blends scale detail with an abundance of power, crisp control action and AS3X® stability to give you one of the most exciting EDF experiences of any size.

Twin 28mm Ducted Fans with Powerful 13,500Kv Brushless Motors
This extremely effective power system delivers exciting speed and climb performance as well as generous flight times of approximately 5 -7 minutes when powered by the recommended 800mAh 2S flight battery(Sold Separately).
Best-in-Class Maneuverability
The design’s abundance of power and light wing packing let you bank and tug to your heart’s material. The practical dual rudders offer sufficient yaw authority for knife-edge flight, too. And you get all this responsiveness with no difficult stall qualities or temperamental slow-speed habits, so even less experienced RC pilots can unwind and have fun.

AS3X® Stabilization Technology
The AS3X innovation built into the receiver works behind the scenes to smooth out the results of wind and turbulence. The outcome is a sense of stability and precision that makes you seem like you’re flying a much larger EDF.

Unequaled Scale Information
The excellent scale overview captures the threat of a full-scale A-10 much better than other RC Warthog this size. The trim plan and markings are inspired by the unusual “Flipper” camouflage that appeared on some A-10s in the early ‘90s. Other scale touches include a clear canopy with pilot figure, nose cannon detail, molded panel lines and more.

Detachable Landing Gear and Steerable Nose Wheel
The wide-stance landing gear and steerable nose wheel make it fun to shoot touch-and-gos. If you desire a more realistic appearance in flight, the landing gear can easily be gotten rid of in a few seconds, no tools needed.

 

Had to Complete

What's in the box?

Full-variety, 4+ channel DSMX®/DSM2® transmitter
450-800mAh 2S LiPo flight battery
2S compatible LiPo charger

(1) UMX™ A-10 BL BNF Basic
(1) User Manual






Tech Notes


You will need...
Full-range, 4+ channel DSMX®/DSM2® transmitter
450-800mAh 2S LiPo flight battery
2S compatible LiPo charger






Specifications


Wingspan: 22.1 in (562mm)
Overall Length: 20.3 in (516mm)
Wing Location: 83.7 sq in (5.40 sq dm)
Flying Weight: 5.9oz (168g)
Motor Size: BL180m, 13500Kv inrunner brushless motor
Radio: 4ch
CG (center of mass): 36mm back from leading edge of wing @ root
Suggested Battery: 800mAh 2S 7.4V 20C LiPo 20AWG JST
Flaps: N
Withdraws: N
Landing Gear: Y
Steering: Y
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Is Assembly Required: Yes





Media Gallery





 View Image Gallery