E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) design that ended up being an instantaneous best-seller when it was released in 2005. It was offered for more than a decade and is still iconic to this day due to the fact that it fit as quickly and in as little time as foam PNP models, yet used the benefits of light-weight, stiff, and strong wood building that provided flight performance unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and upgraded version that is slightly bigger to provide even much better flight performance with extremely popular and common three or four 2200–3200mAh batteries. It's offered in an ARF version that bolts together and is prepared for installation of your favored power system and electronics, or in a BNF Fundamental version that's geared up with 4 factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both variations are prepared to accept 2 extra wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel trousers to look a lot more like the bigger Garage 9 Ultra Stick models the design is based upon. That design offers outstanding low-speed characteristics for much easier landings, incredible high-speed handling, and excellent aerobatic abilities that intermediate to knowledgeable pilots will appreciate and enjoy!





Features

Motivated by the iconic Mini Ultra Stick to modern-day technologies, features, and performance for "mild to wild" abilities

A terrific first-ever "wood," everyday sport flying and aerobatic capable design for a large range of pilots

Specially tuned brushless motor suitable with three and four batteries without the need for modifications

Popular and cost effective 2200–3200mAh batteries provide a wide variety of performance and flight times

45-amp Spektrum™ Avian™ Smart Lite ESC provides real-time battery voltage, existing, and other information through suitable receivers and transmitters

Optional-use motor reversing for special ground handling and other abilities

Suitable with the Spektrum™ DXS transmitter consisted of with lots of RTF trainer models

Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® innovation

Simpler to fly with innovative and optional-use SAFE® Select flight envelope security

The unmatched stability and locked-in feel of special AS3X® innovation

4 long lasting, factory-installed metal-geared servos and linkages

Bigger control surfaces for added control and sport to mild 3D aerobatic abilities

The alternative to include 2 more wing servos to use crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew

Steerable tailwheel plus big tires for the ability to remove from/land on a range of surfaces, including grass

Strong and stiff – yet light-weight and long-lasting – built-up wood building

Quick and easy bolt-together assembly – no glue, tape, or special tools needed





Overview
The E-flite Ultra Stick 1.1m is based upon the design of bigger Garage 9 Ultra Stick models and was motivated by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick ended up being an all-time top-seller as E-flite's first-ever "wood" PNP and ARF design that bolted together so it could be assembled as quickly and in as little time as foam PNP models. It also used the benefits that strong, stiff and light-weight, built-up wood building used – which provided flight performance unlike molded foam models. The Ultra Stick 1.1m is an updated, upgraded, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet features stiffer tail surfaces – that set up rapidly and quickly with just 2 locknuts – and a more powerful mounting area for the primary equipment installed with 4 bolts. The one-piece wing is easy to set up and remove thanks to the single thumbscrew, plus it's set up to accept 2 extra servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Fundamental version is geared up with 4 factory-installed metal-geared servos, a 3S and four suitable Spektrum motor, and an unique Avian 45-amp Smart Lite ESC that can provide a range of real-time power system telemetry information with Smart and non-Smart batteries through suitable Spektrum AirWare™ geared up transmitters. It's also geared up with an AR631 receiver to provide fly-by range and real-time telemetry information, including battery voltage, existing, ESC temperatures, and more — plus motor reversing for special ground handling and other abilities — along with the benefits of AS3X® and optional-use SAFE® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is prepared for installation of your favored electronics and power system! And due to the fact that it's based upon the design of bigger Garage 9 Ultra Stick models, it offers the same excellent low-speed flight characteristics that make for much easier landings, along with outstanding high-speed handling and exceptional fundamental to mild 3D aerobatic abilities. You can even set up the optional wheel trousers (offered independently) to make it look more like bigger Ultra Stick models! This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots.





 





 







Bind-N-Fly Conclusion Level Advantage
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) airplane make getting into the air rapidly and with the very best control experience possible much easier than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver installed, so all you require to do is bind the receiver to a suitable transmitter, finish any final assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is geared up with an unique Spektrum™ Avian™ Smart Lite ESC that can provide a range of real-time power system-related telemetry information, including motor RPM, existing, battery voltage, and more – with Smart and non-Smart batteries – through suitable receivers (including the AR631) and Spektrum AirWare™ geared up transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is geared up with special Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to ravel the effects of wind and turbulence to provide a locked-in feel that makes it seem like you're flying a much bigger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automated self-leveling that can be switched on and off at the flip of a switch to make it much easier to remove, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is three and four suitable, using a wide variety of "mild to wild" performance – from sport flying and fundamental aerobatics with three batteries to hovering and limitless vertical performance with four batteries! The practical top-mounted and magnetically protected hatch cover makes setting up and eliminating common and popular 2200–3200mAh batteries easy.
 






Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, using a flying experience you can't get with molded foam models! Most importantly, it gets here mainly factory-assembled, and the BNF Fundamental version also includes long lasting, factory-installed metal-geared servos and linkages. And in the regrettable occasion you damage any airframe parts or parts and can't fix them, a complete line of replacement/spare parts is easily available.
 



Uniquely Capable
The iconic Mini Ultra Stick motivated the Ultra Stick 1.1m. And due to the fact that it's based upon the design of bigger Garage 9 Ultra Stick models, it offers the same outstanding low-speed flight characteristics that make for much easier landings, along with outstanding high-speed handling and fantastic fundamental to mild 3D aerobatic abilities. This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots. Plus, it's set up to accept 2 extra servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Fundamental version Ultra Stick 1.1m gets here mainly factory-assembled with the power system, servos, and receiver installed. The ARF version is also mainly factory-assembled, so all you require to do is finish some fast and easy final bolt-together assembly – without glue, tape, or special tools – and you'll be prepared to fly in less time compared to almost all other wood models!
 






 





Specs

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Battery charger: Sold Separately

Conclusion Level: Bind-N-Fly Basic

Adapter Type: IC3

Flaps: Optional

LiPo Compatibility: 3S, 4S

Product: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Item Length: 39.1" (993 mm)

Item Weight: 31.7oz (898g) without Battery

Propeller Size: 10 x 5E

Radio: Sold Separately

Receiver: Included

Recommended Motor Battery: 3S 11.1V or four 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Adapter

Servos: Included

Ability Level: Level 2

Speed Control: Included

Spinner Size: 2" (51 mm)

Innovation : Smart, AS3X and SAFE

Trim Scheme Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)