E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that ended up being an instant best-seller when it was launched in 2005. It was available for more than a decade and is still iconic to this day because it went together as quickly and in as little time as foam PNP models, yet used the advantages of lightweight, stiff, and strong wood construction that delivered flight efficiency unlike comparable class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an upgraded and updated version that is slightly larger to use even much better flight efficiency with exceptionally popular and typical three or four 2200–3200mAh batteries. It's available in an ARF version that bolts together and is prepared for installation of your preferred power system and electronic devices, or in a BNF Fundamental version that's equipped with 4 factory-installed servos, a Spektrum Bird Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select innovations. Both variations are prepared to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, in addition to optional wheel pants to look a lot more like the larger Hangar 9 Ultra Stick models the design is based on. That design offers exceptional low-speed attributes for much easier landings, amazing high-speed handling, and impressive aerobatic capabilities that intermediate to experienced pilots will value and enjoy!





Features

Motivated by the iconic Mini Ultra Stick to modern-day innovations, features, and efficiency for "moderate to wild" capabilities

An excellent first-ever "wood," daily sport flying and aerobatic capable model for a broad range of pilots

Specially tuned brushless motor suitable with three and four batteries without the need for modifications

Popular and cost effective 2200–3200mAh batteries provide a wide variety of efficiency and flight times

45-amp Spektrum™ Bird™ Smart Lite ESC offers real-time battery voltage, existing, and other data via suitable receivers and transmitters

Optional-use motor reversing for special ground handling and other capabilities

Suitable with the Spektrum™ DXS transmitter included with numerous RTF fitness instructor models

Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® innovation

Much easier to fly with ingenious and optional-use SAFE® Select flight envelope protection

The unrivaled stability and locked-in feel of exclusive AS3X® innovation

Four resilient, factory-installed metal-geared servos and linkages

Larger control surface areas for included control and sport to moderate 3D aerobatic capabilities

The alternative to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew

Steerable tailwheel plus large tires for the capability to take off from/land on a range of surface areas, including grass

Strong and stiff – yet lightweight and lasting – built-up wood construction

Fast and easy bolt-together assembly – no glue, tape, or special tools needed





Overview
The E-flite Ultra Stick 1.1m is based on the design of larger Hangar 9 Ultra Stick models and was influenced by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick ended up being an all-time top-seller as E-flite's first-ever "wood" PNP and ARF model that bolted together so it could be put together as quickly and in as little time as foam PNP models. It likewise used the advantages that strong, stiff and lightweight, built-up wood construction used – which delivered flight efficiency unlike molded foam models. The Ultra Stick 1.1m is an upgraded, updated, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still lightweight yet includes stiffer tail surface areas – that set up rapidly and quickly with simply two locknuts – and a more powerful installing area for the main equipment set up with 4 bolts. The one-piece wing is easy to set up and remove thanks to the single thumbscrew, plus it's established to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Fundamental version is equipped with 4 factory-installed metal-geared servos, a 3S and four suitable Spektrum motor, and a special Bird 45-amp Smart Lite ESC that can supply a range of real-time power system telemetry data with Smart and non-Smart batteries via suitable Spektrum AirWare™ equipped transmitters. It's likewise equipped with an AR631 receiver to supply fly-by range and real-time telemetry data, including battery voltage, existing, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — along with the advantages of AS3X® and optional-use SAFE® Select innovations. Or, the ARF (Almost-Ready-To-Fly) version is prepared for installation of your preferred electronic devices and power system! And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the exact same excellent low-speed flight attributes that produce much easier landings, along with exceptional high-speed handling and exceptional basic to moderate 3D aerobatic capabilities. You can even set up the optional wheel pants (offered independently) to make it look more like larger Ultra Stick models! This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable model for a wide variety of pilots.





 





 







Bind-N-Fly Conclusion Level Advantage
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make entering the air rapidly and with the very best control experience possible much easier than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver set up, so all you require to do is bind the receiver to a compatible transmitter, finish any last assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is equipped with a special Spektrum™ Bird™ Smart Lite ESC that can supply a variety of real-time power system-related telemetry data, including motor RPM, existing, battery voltage, and more – with Smart and non-Smart batteries – via suitable receivers (including the AR631) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is equipped with exclusive Spektrum™ AS3X® and SAFE® Select innovations. AS3X works behind the scenes to smooth out the impacts of wind and turbulence to provide a locked-in feel that makes it seem like you're flying a much larger aircraft. Optional-use SAFE Select offers pitch and bank angle limitations along with automated self-leveling that can be turned on and off at the flip of a switch to make it much easier to take off, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is three and four suitable, using a wide variety of "moderate to wild" efficiency – from sport flying and basic aerobatics with three batteries to hovering and limitless vertical efficiency with four batteries! The hassle-free top-mounted and magnetically secured hatch cover makes installing and getting rid of typical and popular 2200–3200mAh batteries easy.
 






Wood Airframe
The balsa and lite-ply airframe is lightweight yet stiff and strong, using a flying experience you can't get with molded foam models! Most importantly, it gets here mostly factory-assembled, and the BNF Fundamental version likewise consists of resilient, factory-installed metal-geared servos and linkages. And in the regrettable occasion you harm any airframe parts or parts and can't fix them, a full line of replacement/spare parts is readily offered.
 



Uniquely Capable
The iconic Mini Ultra Stick influenced the Ultra Stick 1.1m. And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the exact same exceptional low-speed flight attributes that produce much easier landings, along with exceptional high-speed handling and fantastic basic to moderate 3D aerobatic capabilities. This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable model for a wide variety of pilots. Plus, it's established to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Fundamental version Ultra Stick 1.1m gets here mostly factory-assembled with the power system, servos, and receiver set up. The ARF version is likewise mostly factory-assembled, so all you require to do is finish some fast and easy last bolt-together assembly – without glue, tape, or special tools – and you'll be prepared to fly in less time compared to almost all other wood models!
 






 





Requirements

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Battery charger: Sold Separately

Conclusion Level: Bind-N-Fly Basic

Port Type: IC3

Flaps: Optional

LiPo Compatibility: 3S, FOUR

Material: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Product Length: 39.1" (993 mm)

Product Weight: 31.7oz (898g) without Battery

Prop Size: 10 x 5E

Radio: Sold Separately

Receiver: Consisted of

Recommended Motor Battery: 3S 11.1V or four 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Port

Servos: Consisted of

Skill Level: Level 2

Speed Control: Included

Spinner Size: 2" (51 mm)

Innovation : Smart, AS3X and SAFE

Trim Plan Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)