E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) design that became an instantaneous best-seller when it was launched in 2005. It was available for more than a decade and is still renowned to this day since it fit as quickly and in as little time as foam PNP models, yet offered the benefits of light-weight, stiff, and strong wood building that delivered flight efficiency unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and upgraded version that is somewhat larger to provide even much better flight efficiency with exceptionally popular and typical three or 4S 2200–3200mAh batteries. It's available in an ARF version that bolts together and is prepared for setup of your preferred power system and electronics, or in a BNF Basic version that's geared up with 4 factory-installed servos, a Spektrum Bird Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both versions are prepared to accept 2 additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, in addition to optional wheel pants to look a lot more like the larger Hangar 9 Ultra Stick models the style is based upon. That style uses outstanding low-speed qualities for much easier landings, amazing high-speed handling, and excellent aerobatic capabilities that intermediate to knowledgeable pilots will appreciate and enjoy!





Features

Influenced by the renowned Mini Ultra Stick to modern-day technologies, features, and efficiency for "moderate to wild" capabilities

An excellent first-ever "wood," daily sport flying and aerobatic capable design for a large variety of pilots

Specially tuned brushless motor compatible with three and 4S batteries without the need for modifications

Popular and cost effective 2200–3200mAh batteries deliver a vast array of efficiency and flight times

45-amp Spektrum™ Bird™ Smart Lite ESC supplies real-time battery voltage, present, and other information by means of compatible receivers and transmitters

Optional-use motor reversing for special ground handling and other capabilities

Compatible with the Spektrum™ DXS transmitter included with many RTF fitness instructor models

Spektrum™ AR631 receiver with fly-by variety telemetry and industry-leading DSMX® innovation

Easier to fly with ingenious and optional-use SAFE® Select flight envelope defense

The unrivaled stability and locked-in feel of special AS3X® innovation

4 durable, factory-installed metal-geared servos and linkages

Larger control surfaces for added control and sport to moderate 3D aerobatic capabilities

The option to add 2 more wing servos to use crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and simple to install/remove with a single thumbscrew

Steerable tailwheel plus large tires for the ability to remove from/land on a variety of surfaces, including lawn

Strong and stiff – yet light-weight and long-lasting – built-up wood building

Quick and simple bolt-together assembly – no glue, tape, or special tools required





Overview
The E-flite Ultra Stick 1.1m is based upon the style of larger Hangar 9 Ultra Stick models and was influenced by the renowned Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF design that bolted together so it could be put together as quickly and in as little time as foam PNP models. It likewise offered the advantages that strong, stiff and light-weight, built-up wood building offered – which delivered flight efficiency unlike molded foam models. The Ultra Stick 1.1m is an updated, upgraded, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet includes stiffer tail surfaces – that install rapidly and quickly with just 2 locknuts – and a more powerful mounting location for the primary gear set up with 4 bolts. The one-piece wing is simple to install and remove thanks to the single thumbscrew, plus it's established to accept 2 additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Basic version is geared up with 4 factory-installed metal-geared servos, a three and 4S compatible Spektrum motor, and a special Bird 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry information with Smart and non-Smart batteries by means of compatible Spektrum AirWare™ geared up transmitters. It's likewise geared up with an AR631 receiver to provide fly-by variety and real-time telemetry information, including battery voltage, present, ESC temperatures, and more — plus motor reversing for special ground handling and other capabilities — along with the advantages of AS3X® and optional-use SAFE® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is prepared for setup of your preferred electronics and power system! And since it's based upon the style of larger Hangar 9 Ultra Stick models, it uses the very same terrific low-speed flight qualities that produce much easier landings, along with outstanding high-speed handling and impressive fundamental to moderate 3D aerobatic capabilities. You can even install the optional wheel pants (offered independently) to make it look more like larger Ultra Stick models! This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable design for a vast array of pilots.





 





 







Bind-N-Fly Completion Level Advantage
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air rapidly and with the very best control experience possible much easier than ever. They come out of package with the power system, servos, and a Spektrum 2.4GHz receiver set up, so all you require to do is bind the receiver to a suitable transmitter, finish any last assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is geared up with a special Spektrum™ Bird™ Smart Lite ESC that can provide a variety of real-time power system-related telemetry information, including motor RPM, present, battery voltage, and more – with Smart and non-Smart batteries – by means of compatible receivers (including the AR631) and Spektrum AirWare™ geared up transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is geared up with special Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to ravel the results of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select uses pitch and bank angle limits along with automated self-leveling that can be turned on and off at the flip of a switch to make it much easier to remove, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is three and 4S compatible, offering a vast array of "moderate to wild" efficiency – from sport flying and fundamental aerobatics with three batteries to hovering and limitless vertical efficiency with 4S batteries! The practical top-mounted and magnetically protected hatch cover makes setting up and getting rid of typical and popular 2200–3200mAh batteries simple.
 






Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, offering a flying experience you can't get with molded foam models! Best of all, it gets here mostly factory-assembled, and the BNF Basic version likewise consists of durable, factory-installed metal-geared servos and linkages. And in the regrettable event you harm any airframe parts or elements and can't repair them, a complete line of replacement/spare parts is easily available.
 



Uniquely Capable
The renowned Mini Ultra Stick influenced the Ultra Stick 1.1m. And since it's based upon the style of larger Hangar 9 Ultra Stick models, it uses the very same outstanding low-speed flight qualities that produce much easier landings, along with outstanding high-speed handling and fantastic fundamental to moderate 3D aerobatic capabilities. This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable design for a vast array of pilots. Plus, it's established to accept 2 additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Basic version Ultra Stick 1.1m gets here mostly factory-assembled with the power system, servos, and receiver set up. The ARF version is likewise mostly factory-assembled, so all you require to do is finish some quick and simple last bolt-together assembly – without glue, tape, or special tools – and you'll be prepared to fly in less time compared to nearly all other wood models!
 






 





Specifications

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Port Type: IC3

Flaps: Optional

LiPo Compatibility: 3S, 4S

Material: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Product Length: 39.1" (993 mm)

Product Weight: 31.7oz (898g) without Battery

Prop Size: 10 x 5E

Radio: Sold Separately

Receiver: Consisted of

Recommended Motor Battery: 3S 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Port

Servos: Consisted of

Ability Level: Level 2

Speed Control: Included

Spinner Size: 2" (51 mm)

Technology : Smart, AS3X and SAFE

Trim Scheme Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)