E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that became an instantaneous best-seller when it was released in 2005. It was available for more than a decade and is still renowned to this day because it fit as easily and in as little time as foam PNP models, yet offered the benefits of light-weight, stiff, and strong wood building that delivered flight efficiency unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an upgraded and upgraded variation that is somewhat bigger to offer even better flight efficiency with very popular and common three or four 2200–3200mAh batteries. It's available in an ARF variation that bolts together and is prepared for installation of your favored power system and electronics, or in a BNF Standard variation that's geared up with 4 factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select innovations. Both versions are prepared to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel pants to look even more like the bigger Hangar 9 Ultra Stick models the style is based on. That style uses exceptional low-speed attributes for much easier landings, amazing high-speed handling, and impressive aerobatic capabilities that intermediate to skilled pilots will value and enjoy!





Features

Motivated by the renowned Mini Ultra Stick to modern-day innovations, features, and efficiency for "moderate to wild" capabilities

A terrific first-ever "wood," daily sport flying and aerobatic capable model for a wide variety of pilots

Specifically tuned brushless motor compatible with three and four batteries without the requirement for modifications

Popular and affordable 2200–3200mAh batteries deliver a large range of efficiency and flight times

45-amp Spektrum™ Avian™ Smart Lite ESC supplies real-time battery voltage, current, and other data through compatible receivers and transmitters

Optional-use motor reversing for special ground handling and other capabilities

Compatible with the Spektrum™ DXS transmitter included with numerous RTF fitness instructor models

Spektrum™ AR631 receiver with fly-by variety telemetry and industry-leading DSMX® innovation

Easier to fly with innovative and optional-use SAFE® Select flight envelope defense

The unrivaled stability and locked-in feel of exclusive AS3X® innovation

4 long lasting, factory-installed metal-geared servos and linkages

Bigger control surfaces for added control and sport to moderate 3D aerobatic capabilities

The option to include two more wing servos to use crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and simple to install/remove with a single thumbscrew

Steerable tailwheel plus big tires for the capability to remove from/land on a variety of surfaces, including yard

Strong and stiff – yet light-weight and lasting – built-up wood building

Quick and simple bolt-together assembly – no glue, tape, or special tools required





Overview
The E-flite Ultra Stick 1.1m is based on the style of bigger Hangar 9 Ultra Stick models and was motivated by the renowned Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF model that bolted together so it might be put together as easily and in as little time as foam PNP models. It likewise offered the advantages that strong, stiff and light-weight, built-up wood building offered – which delivered flight efficiency unlike molded foam models. The Ultra Stick 1.1m is an upgraded, upgraded, and more fine-tuned variation of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet includes stiffer tail surfaces – that set up rapidly and easily with just two locknuts – and a stronger installing area for the main equipment installed with 4 bolts. The one-piece wing is simple to set up and remove thanks to the single thumbscrew, plus it's set up to accept two additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Standard variation is geared up with 4 factory-installed metal-geared servos, a three and four compatible Spektrum motor, and an exclusive Avian 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries through compatible Spektrum AirWare™ geared up transmitters. It's likewise geared up with an AR631 receiver to provide fly-by variety and real-time telemetry data, including battery voltage, current, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — together with the advantages of AS3X® and optional-use SAFE® Select innovations. Or, the ARF (Almost-Ready-To-Fly) variation is prepared for installation of your favored electronics and power system! And because it's based on the style of bigger Hangar 9 Ultra Stick models, it uses the very same excellent low-speed flight attributes that produce much easier landings, together with exceptional high-speed handling and outstanding basic to moderate 3D aerobatic capabilities. You can even set up the optional wheel pants (sold separately) to make it look more like bigger Ultra Stick models! This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable model for a large range of pilots.





 





 







Bind-N-Fly Completion Level Advantage
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air rapidly and with the best control experience possible much easier than ever. They come out of package with the power system, servos, and a Spektrum 2.4GHz receiver installed, so all you need to do is bind the receiver to a compatible transmitter, end up any final assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is geared up with an exclusive Spektrum™ Avian™ Smart Lite ESC that can provide a variety of real-time power system-related telemetry data, including motor RPM, current, battery voltage, and more – with Smart and non-Smart batteries – through compatible receivers (including the AR631) and Spektrum AirWare™ geared up transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is geared up with exclusive Spektrum™ AS3X® and SAFE® Select innovations. AS3X works behind the scenes to ravel the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much bigger aircraft. Optional-use SAFE Select uses pitch and bank angle limitations together with automatic self-leveling that can be switched on and off at the flip of a switch to make it much easier to remove, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is three and four compatible, offering a large range of "moderate to wild" efficiency – from sport flying and basic aerobatics with three batteries to hovering and unlimited vertical efficiency with four batteries! The practical top-mounted and magnetically protected hatch cover makes installing and removing common and popular 2200–3200mAh batteries simple.
 






Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, offering a flying experience you can't get with molded foam models! Best of all, it gets here mainly factory-assembled, and the BNF Standard variation likewise consists of long lasting, factory-installed metal-geared servos and linkages. And in the regrettable event you harm any airframe parts or parts and can't repair them, a full line of replacement/spare parts is easily offered.
 



Uniquely Capable
The renowned Mini Ultra Stick motivated the Ultra Stick 1.1m. And because it's based on the style of bigger Hangar 9 Ultra Stick models, it uses the very same exceptional low-speed flight attributes that produce much easier landings, together with exceptional high-speed handling and fantastic basic to moderate 3D aerobatic capabilities. This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable model for a large range of pilots. Plus, it's set up to accept two additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Standard variation Ultra Stick 1.1m gets here mainly factory-assembled with the power system, servos, and receiver installed. The ARF variation is likewise mainly factory-assembled, so all you need to do is end up some quick and simple final bolt-together assembly – without glue, tape, or special tools – and you'll be prepared to fly in less time compared to nearly all other wood models!
 






 





Requirements

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Connector Type: IC3

Flaps: Optional

LiPo Compatibility: THREE, FOUR

Material: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Item Length: 39.1" (993 mm)

Item Weight: 31.7oz (898g) without Battery

Prop Size: 10 x 5E

Radio: Sold Separately

Receiver: Consisted of

Recommended Motor Battery: THREE 11.1V or four 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Connector

Servos: Consisted of

Ability Level: Level 2

Speed Control: Included

Spinner Size: 2" (51 mm)

Innovation : Smart, AS3X and SAFE

Trim Plan Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)