E-Flite Ultra Stick 1.1m ARF

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) design that became an immediate best-seller when it was released in 2005. It was offered for more than a years and is still iconic to this day since it went together as quickly and in as little time as foam PNP models, yet offered the advantages of light-weight, stiff, and strong wood construction that delivered flight efficiency unlike comparable class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and updated version that is a little larger to offer even much better flight efficiency with incredibly popular and common 3S or four 2200–3200mAh batteries. It's offered in an ARF version that bolts together and is all set for setup of your favored power system and electronic devices, or in a BNF Fundamental version that's geared up with four factory-installed servos, a Spektrum Bird Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both variations are all set to accept 2 additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel trousers to look even more like the larger Hangar 9 Ultra Stick models the design is based upon. That design offers exceptional low-speed qualities for easier landings, unbelievable high-speed handling, and excellent aerobatic abilities that intermediate to skilled pilots will value and enjoy!





Features

Influenced by the iconic Mini Ultra Stick with modern-day technologies, features, and efficiency for "moderate to wild" abilities

A great first-ever "wood," everyday sport flying and aerobatic capable design for a broad variety of pilots

Popular and affordable 2200–3200mAh batteries deliver a wide variety of efficiency and flight times

Larger control surfaces for added control and sport to moderate 3D aerobatic abilities

Fast and simple|simple} bolt-together assembly – no glue, tape, or special tools needed

The choice to include 2 more wing servos to make use of crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew

Steerable tailwheel plus big tires for the ability to take off from/land on a variety of surfaces, consisting of yard

Strong and stiff – yet light-weight and lasting – built-up wood construction





Overview
The E-flite Ultra Stick 1.1m is based upon the design of larger Hangar 9 Ultra Stick models and was motivated by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF design that bolted together so it could be assembled as quickly and in as little time as foam PNP models. It likewise offered the advantages that strong, stiff and light-weight, built-up wood construction offered – which delivered flight efficiency unlike molded foam models. The Ultra Stick 1.1m is an updated, updated, and more fine-tuned version of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet includes stiffer tail surfaces – that set up rapidly and quickly with just 2 locknuts – and a more powerful installing area for the main gear installed with four bolts. The one-piece wing is easy to set up and get rid of thanks to the single thumbscrew, plus it's established to accept 2 additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Fundamental version is geared up with four factory-installed metal-geared servos, a 3S and four compatible Spektrum motor, and an exclusive Bird 45-amp Smart Lite ESC that can supply a variety of real-time power system telemetry data with Smart and non-Smart batteries by means of compatible Spektrum AirWare™ geared up transmitters. It's likewise geared up with an AR631 receiver to supply fly-by variety and real-time telemetry data, consisting of battery voltage, existing, ESC temps, and more — plus motor reversing for special ground handling and other abilities — together with the advantages of AS3X® and optional-use SAFE® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is all set for setup of your favored electronic devices and power system! And since it's based upon the design of larger Hangar 9 Ultra Stick models, it offers the very same great low-speed flight qualities that make for easier landings, together with exceptional high-speed handling and impressive basic to moderate 3D aerobatic abilities. You can even set up the optional wheel trousers (offered independently) to make it look more like larger Ultra Stick models! This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots.





 





 







Almost-Ready-To-Fly Flexibility
This Almost-Ready-To-Fly (ARF) version shows up mostly factory-assembled and all set to set up the motor, ESC, servos, and receiver you prefer (all offered independently).
 



Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, offering a flying experience you can't get with molded foam models! Best of all, it shows up mostly factory-assembled, and the BNF Fundamental version likewise includes durable, factory-installed metal-geared servos and linkages. And in the regrettable event you harm any airframe parts or parts and can't fix them, a complete line of replacement/spare parts is easily available.
 






Uniquely Capable
The iconic Mini Ultra Stick motivated the Ultra Stick 1.1m. And since it's based upon the design of larger Hangar 9 Ultra Stick models, it offers the very same exceptional low-speed flight qualities that make for easier landings, together with exceptional high-speed handling and amazing basic to moderate 3D aerobatic abilities. This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots. Plus, it's established to accept 2 additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 



Easy Assembly
The BNF Fundamental version Ultra Stick 1.1m shows up mostly factory-assembled with the power system, servos, and receiver installed. The ARF version is likewise mostly factory-assembled, so all you need to do is complete some quick and easy final bolt-together assembly – without glue, tape, or special tools – and you'll be all set to fly in less time compared to practically all other wood models!
 






 



Specifications

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Charger: Sold Separately

Conclusion Level: Almost Ready-To-Fly

Flaps: Optional

LiPo Compatibility: THREE, 4S

Product: Wood

Minimum Required Radio: Full-range 4–7+ Channel Transmitter

Power Type: Electric

Item Length: 39.1" (993 mm)

Item Weight: 31.7oz (898g) without Battery

Radio: Sold Separately

Receiver: Sold Separately

Recommended Motor Battery: THREE 11.1V or four 14.8V 2200–3200mAh LiPo

Servos: Sold Separately

Ability Level: Level 3

Speed Control: Sold Separately

Trim Plan Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)