E-Flite Timber X 1.2m PNP

Key Features

Incredible Brief Launch and Landing (STOL) plus 3D capabilities

Enlarged and extra-large control surface areas with double-beveled hinge lines

6 long lasting and factory-installed high-torque, metal-geared servos

High-power 3S and 4S suitable brushless outrunner motor and 50-amp ESC

Shock-absorbing landing gear with extra-large tundra-style wheels

Practical and factory-installed LED landing, navigation and strobe lights

Lightweight yet long lasting composite-reinforced, hollow-core EPO building and construction

Optional-use leading edge slats for enhanced STOL and slow flight performance

Optional EDO-style floats (EFL5261, sold separately)


Required to Total

Full-range, 5+ channel transmitter and receiver

2200–3200mAh 3–4S LiPo flight battery (EFLB22003S30 or EFLB22004S30 recommended)

Suitable LiPo charger

What's in the Box?

(1) E-flite Lumber X 1.2m with

(1) 50A Brushless ESC

(1) Brushless Outrunner Motor

(6) High-Torque, Metal-Geared Servos

(1) Set of Optional-Use Leading Edge Slats

(1) Item Manual


Overview
The E-flite Lumber X 1.2m unleashes a brand-new era of STOL plus 3D aerobatic ability. Based on the very popular Lumber 1.5m model but including a brand-new wing design, extra-large control surface areas plus a THREE and 4S suitable power system, it offers an even wider flight envelope to provide a truly “moderate to wild” experience. Hollow-core EPO building and construction with composite reinforcement leads to a light-weight yet strong airframe that's capable of handling severe aerobatic maneuvers while keeping the wing loading low for excellent Brief Launch and Landing (STOL) and slow flight performance. It's also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as strongly as you want from almost any surface area. You can even install the consisted of leading edge slats for enhanced slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus a lot of the other popular features of the original, and the Lumber X is a model almost every pilot can appreciate and enjoy!

Plug-N-Play® Conclusion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are all set to link to the suitable receiver of your option (sold separately). Simply install the receiver, end up any last assembly, and fly!



eXtreme Maneuverability
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that provide an abundance of thrust with a THREE LiPo battery, or eXtra power and vertical performance with a FOUR battery without the need for any adjustments or upgrades.



eXtra Power
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that provide an abundance of thrust with a THREE LiPo battery, or eXtra power and vertical performance with a FOUR battery without the need for any adjustments or upgrades.



very Durable
Composite-reinforced, hollow-core building and construction with EPO material delivers a light-weight yet long lasting airframe. The Lumber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and extra-large tundra-style wheels of the original model so you can fly strongly from almost any surface area.



STOL (Brief Launch and Landing) Capable
The brand-new wing design has a shorter period yet almost as much wing location as the original, plus it features drooped wingtips and can be equipped with the consisted of optional-use leading edge slats for enhanced slow flight and STOL performance. These features, together with the lightweight design, extra-large flaps and high-power brushless motor make it possible to spring into the air or drift down to land in as low as two feet or less.



LED Lights
Like the original, the Lumber X 1.2m includes realistic-looking LED landing, navigation, and strobe lights that are factory-installed and powered from the flight battery.



Optional Drifts
Owners of an initial Lumber 1.5m model can utilize the float set it featured on the Lumber X 1.2m, or the EDO-style float set is readily available separately and consists of the required mounting struts plus a dual-rudder steering system for outstanding handling and simple launches and landings on water.


Specs

Wingspan: 47.5 in (1200 mm)
Overall Length: 41.5 in (1055 mm)
Wing Area: 527.3 sq in (34.0 sq dm)
Flying Weight: 55.0 oz (1560 g)
Motor Size: Brushless Outrunner 10 1300Kv
Prop Size: 12 x 4
Flaps: Y
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes