E-Flite Power 10 Brushless Outrunner Motor, 1100Kv

Features



Comparable to a 10-size glow engine for 32–48 ounce (910–1360 g) planesPerfect for 3D airplanes weighing 28–36 ounces (790–1020 g)Ideal for models needing up to 450 watts of powerHigh-torque, direct-drive alternative to inrunner brushless motorsIncludes mount, prop adapters and installing hardwareExternal rotor design—5mm shaft can easily be reversed for alternative motor installationsSlotted 14-pole outrunner designHigh-quality building and construction with ball bearings and hardened steel shaftQuiet, light-weight operation




Overview


The Power 10 is designed to provide clean and peaceful power for 10-size sport and scale planes weighing 32 to 48 ounces (910 to 1360 grams), 3D planes weighing 28 to 36 ounces (790 to 1020 grams), or models needing up to 450 watts of power. It’s an especially excellent match for the E-flite Brio 10 for high speed F3A accuracy or creative aerobatics.







Tech Notes


* Optimum Operating Temperature: 220 degrees Fahrenheit
* Adequate cooling is needed for all motor operation at optimal existing levels.
* Optimum Burst Current duration is 15 seconds. Sufficient time in between optimum burst periods is needed for proper cooling and to prevent overheating the motor.
* Optimum Burst Current rating is for 3D and restricted motor run flights. Lack of proper throttle management may result in damage to the motor since excessive usage of burst current may overheat the motor.

Examples of Aircraft Setups:
Please see our web site for the most updated information and plane setup examples.

KEEP IN MIND: All information measured at full throttle. Actual efficiency may differ depending on battery and flight conditions.
E-flite Brio 10

Motor: Power 10
ESC: E-flite 40A Brushless V2 (EFLA311B)
Prop: APC 12x6E (APC12060E)
Battery: Thunder Power PRO LITE 2100mAh 11.1V 3-Cell (THP21003SPL)
Flying Weight w/Battery: 2.1 lbs

Amps   Volts   Watts      Input Watts/Pound     RPM
37.2      9.6       357               170                 7800

Anticipate excellent speed and severe vertical power for creative aerobatics. Average duration is roughly 6-9 minutes depending on throttle management.

E-flite Ultimate 20-300 10e

Motor: Power 10
ESC: E-flite 40A Lite Pro SB Brushless (EFLA1040L)
Prop: APC 12x6E (APC12060E)
Battery: Thunder Power 2600mAh 11.1V 3S PRO LITE V2 Li-Po (THP26003SPL2)
Flying Weight w/Battery: 40.7 oz (2.5)

Amps     Volts     Watts       Input Watts/Pound      RPM
40.2        10.7      430                    172               8350

Anticipate ballistic power very strong vertical efficiency ideal for taking out of hovers. Average duration is roughly 5-8 minutes depending on throttle management.


You will require...
40A ESC
6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po
10x5 to 12x6 electric props






Specs


Type: Brushless outrunner motor
Size: 10-size
Bearings or Bushings: One 5 x 14 x 5mm Bearing, and One 5 x 11 x 5mm Bearing
Wire Gauge: 16
Suggested Prop Range: 10x5–12x6
Voltage: 7.2–12
RPM/Volt (Kv): 1100
Resistance (Ri): .043 ohms
Idle Existing (Io): 2.10A @10V
Constant Existing: 32A
Optimum Burst Current: 42A (15 sec)
Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
Speed Control: 35–40A brushless
Weight: 122 g (4.3 oz)
Total Size: 35mm (1.40 in)
Shaft Size: 5mm (.20 in)
Total Length: 43mm (1.60 in)






Articles, Reviews, and Links




 Preview: E-flite RV-9 450 ARF


 John Redman Helps Us Put together The E-flite DHC-2 Beaver 25e


 Preview – E-flite Nieuport 17 250 ARF


 John Redman reveals us the brand-new E-flite PT-19