E-Flite Power 160 Brushless Outrunner Motor, 245Kv

Functions

Equivalent to or going beyond the power of a 160-size, 2-stroke, glow engine for 12–20 lb (5.4–9 kg) planes
Ideal for 3D planes as much as 15 lb (6.8 kg)
High-torque alternative to inrunner brushless motors
Consists of mount and installing hardware
External rotor style for much better cooling
Premium construction with ball bearings and solidified 8mm steel shaft
Consists of 2 12mm prop shaft adapters tapped out for 10–32 threads
Ideal for models needing as much as 2700 watts of power
Slotted 14-pole outrunner style

Summary

The Power 160 is designed to deliver tidy and peaceful power equivalent to or going beyond the power of a 160-size 2-stroke glow engine for sport and scale planes weighing 12 to 20 pounds (5.4 to 9 kg), 3D planes as much as 15 pounds (6.8 kg), or models needing as much as 2700 watts of power.
It provides excellent power for the popular 27% scale aerobatic models such as the Hangar 9 Bonus 260, scale efficiency for the Hangar 9 P-47D Thunderbolt 150 ARF, and severe efficiency for models like the well-known Ultra Stick Lite.



Maximum running temperature: 220 degrees Fahrenheit.

Adequate cooling is needed for all motor operation at optimal current levels.

Maximum burst current period is 15 seconds. Adequate time between maximum burst intervals is required.

You will need...
75A-110A HV brushless ESC
9S–10S Li-Po or 28- to 32-cell Ni-MH/Ni-Cd
18x8 to 20x10 prop

Specs

Type: Brushless outrunner
Size: Equivalent to or going beyond the power of a 160-size 2-stroke glow engine
Bearings or Bushings: One 8 x 19 x 6mm Bearing, and Two 8 x 16 x 5 Bearings
Wire Gauge: 13
Recommended Prop Variety: 18x8 to 20x10
Voltage: 33.3–38.4
RPM/Volt (Kv): 245
Resistance (Ri): .03 ohms
Idle Current (Io): 1.45A @ 10V
Continuous Current: 60A
Optimum Burst Current: 78A (15 sec)
Cells: 28–32 Ni-MH/Ni-Cd or 9S–10S Li-Po
Speed Control: 75–110A High Voltage Brushless
Weight: 650 g (23.0 oz)
General Diameter: 63mm (2.50 in)
Shaft Diameter: 8mm (.30 in) (Consists of 2 12mm threaded prop shaft adapters with 1.5 pitch)
General Length: 64mm (2.50 in)