E-Flite Park 180 Brushless Outrunner Motor, 2200Kv

Suitable for 3D designs 2–3 oz (55–85 g) and sport and scale designs 3–6 oz (85???170 g) or designs needing as much as 30 watts of power.

Features
Suitable for 3D designs weighing 2–3 oz (55–85 g) and sport and scale designs weighing 3–6 oz (85–170 g)
Suitable for indoor and outside little aerobatic park flyers
Very quiet and lightweight—just .3 oz (8.5 g)
High-torque, direct-drive alternative to inrunner brushless motors
Designed for firewall software install or carbon tube install
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Up to 30 watts
Includes prop adapter
Includes install, mounting hardware and 2mm gold BL adapters
Upgraded efficiency for indoor motors
Premium construction with ball bearings and solidified steel shaft

Had to Complete
4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

3x3 Direct Drive Prop

Specs
Application: Plane
Bearings or Bushings: 2 1.5 x 4 x 2mm Bearings
Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
Continuous Existing: 0 - 10A
Idle Existing (Io): .30A @ 8V
Optimum Burst Current: 3.2A (15 sec)
Motor Design: Outrunner
General Size: 16mm (.63 in)
General Length: 20mm (.80 in)
Power Plant Size : 180-280 Electric
RPM/Volt (Kv): 2200
Recommended Prop Range: 3x3 to 6x3 'Direct Drive' for TWO or 4x4 or 4.5x3 for THREE
Resistance (Ri): .91 ohms
Shaft Size: 1.5mm
Size: 180
Speed Control: 4–6A brushless
Type: Brushless outrunner
Voltage: 4.8–11.4V
Weight: 8.5 g (.30 oz)

Regularly purchased with the product that you are presently reading about.



Designed for use with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
3 male bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .59" (15mm)
Size: .079" (2mm) outside

COMMENTS:
For the 2mm female adapter order GPMM3111