E-Flite Park 180 Brushless Outrunner Motor, 2200Kv

Suitable for 3D designs 2–3 oz (55–85 g) and sport and scale designs 3–6 oz (85???170 g) or designs requiring up to 30 watts of power.

Features
Suitable for 3D designs weighing 2–3 oz (55–85 g) and sport and scale designs weighing 3–6 oz (85–170 g)
Suitable for indoor and outside little aerobatic park leaflets
Exceptionally quiet and lightweight—simply .3 oz (8.5 g)
High-torque, direct-drive alternative to inrunner brushless motors
Created for firewall install or carbon tube install
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
As much as 30 watts
Consists of prop adapter
Consists of install, mounting hardware and 2mm gold BL adapters
Upgraded performance for indoor motors
Top quality construction with ball bearings and hardened steel shaft

Had to Complete
4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

3x3 Direct Drive Prop

Specifications
Application: Airplane
Bearings or Bushings: 2 1.5 x 4 x 2mm Bearings
Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
Continuous Current: 0 - 10A
Idle Current (Io): .30A @ 8V
Optimum Burst Current: 3.2A (15 sec)
Motor Style: Outrunner
General Size: 16mm (.63 in)
General Length: 20mm (.80 in)
Power Plant Size : 180-280 Electric
RPM/Volt (Kv): 2200
Suggested Prop Variety: 3x3 to 6x3 'Direct Drive' for TWO or 4x4 or 4.5x3 for 3S
Resistance (Ri): .91 ohms
Shaft Size: 1.5mm
Size: 180
Speed Control: 4–6A brushless
Type: Brushless outrunner
Voltage: 4.8–11.4V
Weight: 8.5 g (.30 oz)

Frequently acquired with the thing that you are presently reading about.



Created for use with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .59" (15mm)
Size: .079" (2mm) outside

COMMENTS:
For the 2mm female connector order GPMM3111