E-Flite 1S High-Current Ultra Micro Battery Adapter Lead

Overview


This is an adapter charge lead for the battery that has the mCP X, EFLB2001S25. This battery has a bigger port than the standard 1-cell ultra micro Li-Po batteries. This adapter lead is utilized to adapt the larger high-current port to the standard ultra micro port which then enables the mCP X battery to be charged with chargers developed for the more common ultra micro batteries.












Below is an additional product that praises the product being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Developed for usage with most Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

INCLUDES:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, usage GPMM3107
This port can be utilized to replace BEC-type connectors.

Below is an additional product that praises the product being gone over.

JST-RCY to Ultra Micro Battery Adapter Lead




Below is a terrific product that many others have bought at the exact same time.

Landing Skid & Batt Mnt: mCP S/X