E-Flite Eratix 3D FF (Flat Foamy) 860mm PNP

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
In the early 2000s, "flat foamy" models were very popular because they could be scratch built from foam sheets you could buy in many shops. Today, most foam models are fully-molded sport and scale airplane – and few can match the distinct capabilities and performance of flat foam models, especially those created and built for aerobatic plus 3D flying! The E-flite® Eratix 3D FF (Flat Foamy) 860mm is best for knowledgeable pilots who currently develop and fly flat foam models, intermediate pilots who have an interest in them however don't want to undertake a complex develop, and less knowledgeable pilots who have constantly wanted to attempt however were intimidated by the extra effort and skills needed to buy, develop and fly such a design. The Eratix 3D FF is the easiest-to-fly, most convenient, and finest value in a flat foamy model yet!





Features

The simplest to buy, assemble and fly flat foamy model yet – efficient in sluggish travelling, sport flying, basic and full-blown 3D aerobatics

Specially tuned brushless motor that's factory-installed and prepared for usage with popular 3S 600–850mAh batteries

15-amp Spektrum Bird™ Smart ESC supplies real-time battery voltage, present, RPM, and other information through compatible receivers and transmitters

Extremely long lasting yet lightweight, high-density EPP airframe with carbon fiber and composite supports

3 factory-installed digital servos and linkages, including a metal-geared aileron servo

Factory-finished in a high-contrast, high-visibility trim plan for excellent orientation

Fast and simple assembly, unlike similar class models – no glue or tape needed

Landing gear snaps into location for simple setup, elimination, and replacement





Overview
The E-flite Eratix 3D FF (Flat Foamy) 860mm offers the aggressive aerobatic plus smooth sport and slow-flying performance of similar class models – without all the inconveniences of purchasing parts for and building one! It bolts/snaps together and can be prepared to fly in less time than it takes to charge a battery compared to the glue, tape, and many hours it generally takes to assemble other "flat foamy" airplane. Its lightweight yet very long lasting EPP airframe is mainly factory-assembled and consists of a factory-installed power system and servos. The 3S compatible brushless motor is matched with a special Spektrum Bird Smart ESC. The BNF Fundamental variation is geared up with an AR630 receiver to deliver real-time telemetry information together with AS3X and SAFE Select innovations. It's little adequate and light adequate to be flown inside your home in gymnasiums and other similar areas or outdoors in backyards, parks, and sports fields, making it a flexible addition to the garage for a variety of pilots!





 






Plug-N-Play® Conclusion Level
This Plug-N-Play (PNP) variation comes out of package with a factory-installed power system and servos that are prepared to link to the compatible receiver of your option (sold independently), plus the transmitter and battery you provide (also sold independently). Install the receiver, complete any final assembly, and fly!
 



Smart Innovation
The Eratix 3D FF is geared up with a special Spektrum™ Bird™ Smart ESC that can provide a variety of real-time power system-related telemetry information, including motor RPM, present, battery voltage, and more – with Smart and non-Smart batteries – through compatible receivers (including the AR630) and Spektrum AirWare™ geared up transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






High Performance
The factory-installed brushless power system includes a specially-tuned outrunner motor. This power system delivers plenty of thrust for limitless vertical and 3D performance with 3S batteries! Use 600mAh batteries to keep the weight down, or approximately 850mAh batteries for longer flight times.
 



Uniquely Capable
Like other flat foamy models, the Eratix 3D FF can sluggish travelling, smooth sport flying, basic aerobatics, and even aggressive 3D flying — all in the exact same flight! It offers a genuinely "mild to wild" flight experience intermediate to knowledgeable pilots will appreciate whether flying inside your home in gymnasiums or outdoors in backyards, parks, sports fields, and beyond.
 






Easy Assembly
Unlike other similar flat foamy models only readily available as packages without power and control parts, the Eratix 3D FF gets here factory-assembled with the power system, servos, and the receiver (BNF Fundamental variation only) installed. All you need to do is complete some fast and simple final bolt/snap-together assembly – without glue, tape, or special tools – and you'll be prepared to fly in less time than it takes to charge a battery!
 



Durable Design
Construction with carbon fiber and composite-reinforced, high-density EPP delivers a light-weight yet stiff and long lasting airframe. In the regrettable event you damage any airframe parts or parts and can't fix them, a complete line of replacement/spare parts is readily offered.
 






 



Requirements

Approximate Assembly Time: Less than 1 Hour

Battery: Sold Separately

Battery Charger: Sold Separately

Conclusion Level: Plug-N-Play

Connector Type: IC2

Material: Foam

Motor Style: Outrunner

Motor Size: 2405- 1200KV 14-Pole

Motor Type: Brushless

Power Type: Electric

Item Length: 35.69" (907 mm)

Item Weight: 13.3oz (376g)

Prop Size: 9x4.6SF Electric

Radio: Sold Separately

Receiver: Sold Separately

Recommended Motor Battery: 850mAh Three 11.1V LiPo Battery with IC2 Connector

Servos: Consisted of

Speed Control: Included

Innovation : Smart

Wingspan: 34" (864 mm)