E-Flite Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Sel

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
In the early 2000s, "flat foamy" models were extremely popular due to the fact that they could be scratch built from foam sheets you could purchase in lots of stores. Today, most foam models are fully-molded sport and scale aircraft – and couple of can match the distinct abilities and performance of flat foam models, specifically those designed and built for aerobatic plus 3D flying! The E-flite® Eratix 3D FF (Flat Foamy) 860mm is ideal for knowledgeable pilots who already build and fly flat foam models, intermediate pilots who have an interest in them but don't want to carry out a complicated build, and less knowledgeable pilots who have always wanted to try but were daunted by the additional effort and abilities needed to purchase, build and fly such a design. The Eratix 3D FF is the easiest-to-fly, most convenient, and finest worth in a flat foamy model yet!





Features

The simplest to purchase, assemble and fly flat foamy model yet – capable of sluggish cruising, sport flying, basic and full-scale 3D aerobatics

Specially tuned brushless motor that's factory-installed and all set for use with popular three 600–850mAh batteries

15-amp Spektrum Avian™ Smart ESC supplies real-time battery voltage, current, RPM, and other data via suitable receivers and transmitters

Spektrum™ AR630 receiver with fly-by range telemetry and industry-leading DSMX® technology

Much easier to fly with ingenious and optional-use SAFE® Select flight envelope security

The unrivaled stability and locked-in feel of special AS3X® technology

Suitable with the Spektrum DXS transmitter included with a lot of the most popular E-flite® and HobbyZone® fitness instructor aircraft models

Extremely long lasting yet lightweight, high-density EPP airframe with carbon fiber and composite supports

Three factory-installed digital servos and linkages, including a metal-geared aileron servo

Factory-finished in a high-contrast, high-visibility trim plan for excellent orientation

Fast and easy assembly, unlike comparable class models – no glue or tape needed

Landing equipment snaps into place for easy setup, removal, and replacement





Overview
The E-flite Eratix 3D FF (Flat Foamy) 860mm provides the aggressive aerobatic plus smooth sport and slow-flying performance of comparable class models – without all the inconveniences of buying parts for and constructing one! It bolts/snaps together and can be all set to fly in less time than it requires to charge a battery compared to the glue, tape, and lots of hours it usually requires to assemble other "flat foamy" aircraft. Its lightweight yet extremely long lasting EPP airframe is mainly factory-assembled and includes a factory-installed power system and servos. The three suitable brushless motor is matched with an unique Spektrum Avian Smart ESC. The BNF Basic variation is equipped with an AR630 receiver to provide real-time telemetry data together with AS3X and SAFE Select technologies. It's small enough and light enough to be flown inside in gymnasiums and other comparable areas or outdoors in backyards, parks, and sports fields, making it a flexible addition to the hangar for a variety of pilots!





 






Exclusive Technologies
The Bind-N-Fly® (BNF®) Basic variation Eratix 3D FF 860mm features special Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the results of wind and turbulence to provide a locked-in feel that makes it appear like you're flying a much bigger aircraft. Optional-use SAFE Select provides pitch and bank angle limitations and automated self-leveling that can be switched on and off at the flip of a switch to make this the simplest to fly flat foamy yet!
 







Bind-N-Fly® Completion Level Advantage
Already own a Spektrum™ transmitter? Bind-N-Fly® (BNF®) aircraft make entering into the air rapidly and with the very best control experience possible simpler than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver set up, so all you need to do is bind the receiver to a suitable transmitter, finish any last assembly, and fly!
 



Smart Technology
The Eratix 3D FF is equipped with an unique Spektrum™ Avian™ Smart ESC that can offer a variety of real-time power system-related telemetry data, including motor RPM, current, battery voltage, and more – with Smart and non-Smart batteries – via suitable receivers (including the AR630) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






High Performance
The factory-installed brushless power system features a specially-tuned outrunner motor. This power system delivers a lot of thrust for unlimited vertical and 3D performance with three batteries! Usage 600mAh batteries to keep the weight down, or approximately 850mAh batteries for longer flight times.
 



Uniquely Capable
Like other flat foamy models, the Eratix 3D FF is capable of sluggish cruising, smooth sport flying, basic aerobatics, and even aggressive 3D flying — all in the very same flight! It provides a truly "moderate to wild" flight experience intermediate to knowledgeable pilots will value whether flying inside in gymnasiums or outdoors in backyards, parks, sports fields, and beyond.
 






Easy Assembly
Unlike other comparable flat foamy models only available as kits without power and control parts, the Eratix 3D FF arrives factory-assembled with the power system, servos, and the receiver (BNF Basic variation only) set up. All you need to do is finish some quick and easy last bolt/snap-together assembly – without glue, tape, or special tools – and you'll be all set to fly in less time than it requires to charge a battery!
 



Durable Design
Building with carbon fiber and composite-reinforced, high-density EPP delivers a lightweight yet stiff and long lasting airframe. In the regrettable occasion you harm any airframe parts or parts and can't repair them, a full line of replacement/spare parts is readily offered.
 






 



Requirements

Approximate Assembly Time: Less than 1 Hour

Battery: Sold Separately

Charger: Sold Separately

Conclusion Level: Bind-N-Fly Basic

Port Type: IC2

Flaps: No

Material: Foam

Minimum Required Radio: 4 Channels

Motor Size: 2405-1200KV

Motor Type: Brushless

Power Type: Electric

Item Length: 35.69" (907 mm)

Item Weight: 13.3oz (376g)

Propeller Size: 9x4.6 Electric Slow Fly

Radio: Sold Separately

Receiver: Included

Recommended Motor Battery: 850mAh 3S 11.1V LiPo Battery with IC2 Port

Servos: Included

Skill Level: Level 2

Speed Control: Included

Innovation : Smart

Wingspan: 34" (864 mm)