E-Flite Carbon-Z Cub SS 2.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The original Carbon-Z® Cub was ground-breaking and created a brand-new category for large-scale, electric-powered designs. Based upon a platform that was known for famous versatility, its lightweight and extremely strong, composite-reinforced and hollow-core design was primarily factory-finished and put together so it was much easier for more pilots to go "BIG" than ever previously. The E-flite® Carbon-Z Cub SS 2.1m is an upgraded and refined variation of the original, equipped with a long list of brand-new features for enhanced flight performance, abilities and benefit so you can enjoy a giant-scale flying experience unlike any other.





Features

An upgraded and refined variation of the ground-breaking and category-creating original Carbon-Z Cub

Giant-scale 84"/2.1m wingspan with lightweight and extremely strong composite-reinforced, hollow-core Carbon-Z building and construction

Drooped wing suggestion design increases wing and aileron location for considerably enhanced sluggish speed performance and control

Thumbscrews with decorative gas caps and snap-on antennas to easily install/remove the two-piece wing without tools

Customized flap design permits them to travel both ways for full-span aileron and other mixing options

Articulated and shock-absorbing landing equipment with enhanced and enhanced installs

Even bigger extra-large, tundra-style wheels with softer tires for much better ground handling

Fully-molded top and bottom landing equipment covers for a more scale-like appearance

More secure rear install and cross braces for the optional drifts (sold independently)

Quick-release, multi-position battery mounting tray (motivated by Morgan Mill RC) fits 4–6S 3200–7000mAh batteries

Improved motor design with included bearing for smoother, more trustworthy performance

15x7 prop formed from material that much better preserves balance and stiffness

IC5 connector (suitable with EC5 connectors) on the 60-amp ESC for much better and more trustworthy power shipment

Vibrant, high-visibility Carbon Cub SS Signature trim and color design

Spektrum™ AR637TA 6-Channel AS3X & SAFE Telemetry Receiver

Easy to fly with innovative, optional-use SAFE® Select flight envelope defense

The unrivaled stability and locked-in feel of special AS3X® technology

Six factory-installed digital, metal-geared servos with ball-link equipped linkages

Convenient push-button released, top-mounted hatch for easy battery gain access to

Incredibly broad scale and moderate to beyond-scale aerobatic and wild flight envelope

Pull as much as 3-meter span sailplanes with the consisted of aerotow system (servo sold independently)





Overview
The E-flite® Carbon-Z® Cub SS 2.1m makes it much easier than ever to enjoy a really special and versatile giant-scale flying experience. Based upon the original Carbon-Z Cub, it's equipped with an abundance of brand-new benefit, ability and flight performance-improving features. An upgraded wing design with drooped suggestions includes wing and aileron location for considerably enhanced sluggish speed handling, performance and control. The customized flap design permits them to travel both ways for full-span aileron and other mixing options, and thumbscrews make it much easier to set up and eliminate the two-piece wing without tools.
Articulated and shock-absorbing landing equipment, equipped with even bigger extra-large tundra-style wheels with softer tires, offers much better ground managing that soaks up the bumps of rough surface areas. The push-button released, top-mounted hatch offers practical and easy access to the battery compartment – which now holds a quick-release, multi-position battery mounting tray that fits FOUR to SIX 3200–7000mAh batteries. An improved motor design featuring an extra bearing, plus a propeller formed from material that much better preserves balance and stiffness, results in smoother and more trustworthy power system performance. The composite-reinforced, hollow-core airframe gets here primarily factory-finished and put together, and the installed digital, metal-geared servos with ball-link equipped linkages provide crisp and exact control.
So whether you fly it sluggish and scale, or perform beyond-scale vertical departures and aerobatics, the Carbon-Z Cub SS will offer unforeseen levels of versatility, ability and performance you'll enjoy flight after flight!





 






More Capability
The Carbon-Z Cub SS includes an upgraded wing design with drooped suggestions that includes wing and aileron location for much better sluggish speed handling, performance and control – comparable to the Airplane Booster Wing Suggestion Set CubCrafters deals for many Cub designs. Plus the customized flap design permits them to travel both ways for full-span aileron and other mixing abilities.
 



More Convenience
Even with its giant-scale 84"/2.1m wingspan, the Carbon-Z Cub SS is easy to store and transportation due to the fact that of the two-piece wing. And now it's easier than ever due to the fact that no tools are needed for field assembly/disassembly with the brand-new thumbscrews. There are even decorative gas caps and antennas that snap onto the thumbscrews for included scale information.

 







More Capable Gear
The brand-new articulated and shock-absorbing landing equipment, which is equipped with even bigger extra-large tundra-style wheels with softer tires, offers much better ground managing that easily soaks up the bumps of rough surface areas. An improved mounting design for the primary equipment makes it more powerful than previously, and fully-molded top and bottom landing equipment covers provide a more scale-like appearance.
 



More Gear Options
An optional float set (sold independently) that includes a servo and functional water rudder, plus a brand-new mounting/strut set (likewise sold independently) that attaches with a more secure rear install and cross braces. Setup is easy, and you have the alternative to change in between drifts and wheels in minutes. SIX LiPo advised if removing from water.
 







More Usefulness
The push-button released, top-mounted hatch offers practical and easy access to the battery compartment that holds a brand-new quick-release, multi-position battery mounting tray (motivated by Morgan Mill RC) that fits most FOUR to SIX 3200–7000mAh batteries.
 



More Reliability
The upgraded power system includes a motor with a better design that includes an extra bearing, in addition to a propeller that's formed from material that much better preserves balance and stiffness, to provide smoother and more trustworthy performance. Plus the ESC is now equipped with an IC5 connector, which is likewise suitable with EC5 connectors, for much better and more trustworthy power shipment.
 







Durable Precision
The lightweight and extremely strong airframe features composite-reinforced, hollow-core Carbon-Z building and construction. Most importantly it gets here primarily factory-assembled and finished in a lively, high-visibility Carbon Cub SS Signature trim and color design. It likewise gets here with factory-installed digital, metal-geared servos and ball-link equipped linkages that provide crisp and exact control.
 



Versatile Performance
From smooth and steady sluggish flight to beyond-scale aerobatics and whatever in between, the Carbon-Z Cub SS has a very broad flight envelope that's ideal for newbie giant-scale and experienced pilots alike.

 







Bind-N-Fly Completion Level Benefit
Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible much easier than ever. They come out of package with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any last assembly, and fly!

This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX® receiver featuring AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the results of wind and turbulence. The result is a heightened sense of stability and accuracy that makes you feel like you're flying a much bigger, skillfully tuned aircraft.

If this is your very first model of its type, or you want an additional margin of safety while familiarizing yourself with the airplane, you can make it possible for the optional-use SAFE® Select flight envelope defense technology developed into the receiver. No programs is needed. Merely alter the binding series as directed in the manual.

With SAFE Select made it possible for, you get:

Pitch and Bank Angle Limits
These envelope restricts keep the airplane from rolling or pitching upside down. They likewise avoid extreme climb or dive angles.

Automatic Self-Leveling
The airplane immediately goes back to and holds level flight when the sticks are released and in the center position. It's likewise valuable for keeping the wings level during takeoffs/launches and landings.

Easy Switch Task—No Complex Programming Required
The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off does not need any complicated programs and takes simply a couple of seconds.

If you do not want to make it possible for the SAFE Select features, simply bind the receiver usually and it will function like a basic AS3X receiver.

 


Specs

Airfoil Shape: Customized Clark-Y

Approximate Assembly Time: Less than 1 hour

Approximate Flight Time: 4 - 10 minutes

Battery: Sold Separately

CG (Center of Gravity): 4.1 - 4.7" (105 - 120mm) from leading edge of wing determined at fuselage

Battery Charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Flaps: Yes

Landing Gear: Fixed primary with steerable tail wheel

Minimum Required Radio: 4-channel

Motor Size: BL50

Motor Type: Brushless

Power Type: Electric

Item Length: 56.3" (1430 mm)

Propeller Size: 15x7E

Radio: Sold Separately

Receiver: Included

Recommended Motor Battery: 4-SIX 4000 - 7000mAh LiPo, 6S LiPo advised if removing from water

Servos: Included

Speed: 50mph (80kph)

Speed Control: Consisted Of

Spinner Size: 2.4" (61 mm)

Steering: Steerable tailwheel

Technology : SAFE Select

Trim Plan Colors: White, orange, black and gray

Wing Location: 1130 sq in (72.9 sq dm)

Wing Loading: 16.6 - 19.3 oz/sq ft (50.7 - 59.0 g/sq dm)

Wingspan: 84.6" (2149 mm)