E-Flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

Updated on Dec 13, 2024 12:01:56 PM


Features



Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)3.5A continuous current, 5V Switch-Mode BEC CircuitStronger BEC for support of most 3-axis stabilization systemsDrive up to 7 analog or 6 digital standard-size servos with the BEC3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltageProgrammable motor brakingSafe power-arm mode prevents accidental startsProgrammable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltageProgrammable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)Programmable soft start for helis and airplanesAuto motor shut down if signal is lost or there is interferenceProgrammable timing—5 user-selectable ranges for use with a large variety of brushless motorsPre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads




Overview


The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.







Specifications


Continuous Maximum Current: 30A (proper cooling required)
Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
Input Connector Types: 16 AWG leads with E-flite EC3 Connector
Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
Momentary Peak Current: 35A (15 sec)
Length: 51.0mm (2.00 in)
Width: 28.0mm (1.10 in)
Height: 8.70mm (0.35 in)
Weight: 31.0 g (1.10 oz)
Wire Gauge: 16 AWG






Articles, Reviews, and Links




 Preview – E-flite Nieuport 17 250 ARF