E-Flite 10-Amp Pro Brushless ESC

This controller has actually been created for use in radio control aircraft and to support constant currents of approximately 10 amps when utilizing 2-3 cell Li-Po battery packs and approximately 4 sub-micro servos. Basic functions consist of advance BEC and safe power-arming together with programmable functions such as low-voltage cutoff, braking, timing and throttle input range.

Features
Approximately 10-amp constant current with appropriate air circulation
Programmable motor braking
Safe power-arm mode avoids unintentional starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1ms-1.9ms or Vehicle Select)
Vehicle motor shutdown if signal is lost or there is interference
Programmable timing-2 user-selectable ranges for use with a big variety of brushless motors
Pre-wired connectors-JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Specifications
Amperage: 20 & Under
Brake: Yes - Programmable
Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
Continuous Optimum Current: 0 - 25A
Height: 0.4 in (10mm)
Input Connector Types: JST
Length: 1.2 in (30mm)
Momentary Peak Current: 12A (15 sec)
Output Connector Types: 20AWG with 2mm female gold bullet connectors
Type: Brushless
Weight: 0.35 oz (10 g)
Width: 0.7 in (17.5mm)