E-Flite 10-Amp Pro Brushless ESC

This controller has actually been designed for use in radio control airplane and to support continuous currents of as much as 10 amps when using 2-3 cell Li-Po battery packs and as much as 4 sub-micro servos. Standard features consist of advance BEC and safe power-arming together with programmable features such as low-voltage cutoff, braking, timing and throttle input variety.

Features
Up to 10-amp continuous present with appropriate air flow
Programmable motor braking
Safe power-arm mode prevents unintentional starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery beginning voltage
Programmable throttle input variety (1.1ms-1.9ms or Auto Select)
Auto motor shutdown if signal is lost or there is disturbance
Programmable timing-2 user-selectable varieties for use with a large variety of brushless motors
Pre-wired connectors-JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Specifications
Amperage: 20 & Under
Brake: Yes - Programmable
Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
Constant Optimum Current: 0 - 25A
Height: 0.4 in (10mm)
Input Port Types: JST
Length: 1.2 in (30mm)
Short-lived Peak Current: 12A (15 sec)
Output Port Types: 20AWG with 2mm female gold bullet ports
Type: Brushless
Weight: 0.35 oz (10 g)
Width: 0.7 in (17.5mm)